Will 10*165 tyres fit on a standard 1983 mini without flaring the arches
please?

timing of a leaded head running on unleaded - with aditive, on a 1981 998cc,
i (will) set the timing at 8 degrees as per haynes manual - but do i have to
advance or retard at all if running unleaded with additive on a leaded head?
thanks

Can anyone help in identifying what car(s)came with motor SN 28G-255-998. I
can not find a cross reference. Is there a x-reference website?
   The head is SN 12G295 and is for 998 Cooper or MG1100 motor.
   Thanks!

Advice please,
I am thinking of fitting a set of 4 Hi-Lo's
Are they better than standard or do I leave well alone,
Thanks

Was wondering if anyone can tell me how vital the oil pressure relief valve
is ? Am asking as I want to fit an oil temperature gauge, as I will be
hillclimbing the car, and Mini Spares do a transducer that fits in the hole
where the relief valve normally fits, which would be a ...

I need help.I have converted my mini to the metro 4 pot callipers and I cant
get the pressure back at the pedal.I have even replaced the master cylinder
bled them in the right sequence according to the Manuel and the pedal is
just spongy.Is there something I am missing?Thanks in ...

Can anyone please help me with the possibilities of fitting Inertia seat
belts in the rear of a Mini circa 1980-90.
Could a pair of front seat belts be fitted in the rear?
Any other suggestions?

hi why has my mini started pulling to the left only slightly all i have had
done is new tyers
but i think she(the lady of the house) might have hit a curb

Is it just me or has it been quiet here lately.  I haven't seen any new messages
since 23rd March 2006.
--
Australia isn't "down under", it's "off to one side"!

People,
I must agree with David Betts,
don't respond to this troll, as you can see ,most of us take a back seat,
even if it means biting your lip, as I have on many occasions,

What tyre size will give me the same rolling radius as the std mini tyre
size of 145/70 R12

Good Morning,
   I am currently in the process of buying a used 2000 A4 Quarttro for
around $12950.00 with roughly 64,000 miles. Was wondering if anyone had
any advice/oppions on this car and or mechanic to look at in the SF Bay

sorry for posting a lot of techie problems recently, i foind the best way of
finding out is asking someone who has done the job before;
after changing the speedo cable, found out the drive must not be turning.  i
have removed the little screw and the plate on top - how do i remove ...

Mini 2CV6 DUCK for sale http://www.classiccarmall.net/classified2-393.htm
Classic Car Mall a fast-growing, hot spot on the Internet to buy, sell
or trade classic cars and trucks. We are committed to providing a safe
and secure location for auto enthusiasts searching for a treasure ...

Hi, my girlfriend's having some problems with the electrics in her '95 1275 , it was fine when it was last parked up (saturday) but this morning (Tuesday) there was nothing at all when the key is turned. Nothing lights up on the dashboard, and nothing inside the car works, ...