I've got troubles getting the dash trim out of my '73 Clubman van.  How do I
get the screen rail out?  I've got the screen rail loose but can't get the
two bolts to clear.  I've pulled out the backing card for the shelf and
disconnected the demister hoses (actually they crumbled ...

Can anyone tell me the order that the coloured headlining hoops are fitted?
I've lost the piece of paper that had the headlining notes on it.
Any help would be really appreciated.
Cheers,

Planning on doing some work to my mini at the end of the summer. Its a
1275 with a LCB and RC40, alloy inlet manifold and a 1.75" HIF44 carb.
I dont want to fit a webber carb and was planning on getting some bigger
valves put in the head as I spent some time gas flowing it a while ...

Well I love it when two of my greatest passions come together, so
having a Doctor Who version of my favourite film pleased me no end!
http://www.youtube.com/watch?v=8HS-FHDPWRw

Anyone have any info on a trottleable Nitrous system for the BMW Mini,  I have heard and red of it
but unable to find info.  Any Help appreciated.
*****************
Thank You  kgsAT@msbx.net

Hi, is anyone breaking a late mini? 1997 onwards?
Looking for a new SRS ECU,
thanks.

Hi Mini Fans,
The British Mini Club have an offer of 10% off the 52mm gauages
(volt/amps etc). Check it out on the BMC website at
http://www.britishminiclub.co.uk/shop/ or

Silly buggers, but the Lego Mini's don't look quite the biz though?  I
mean their supposed to be a 4 seater and have room for that gold too!
Part One:  www.youtube.com/watch?v=d...lian%20job
Part Two:  www.youtube.com/watch?v=i...lian%20job

Does anyone know what has happened to The Minishop in Hertford Road,
Enfield, London? I usually get all my spares there and now I'm looking for
an earth strap and can't get in touch with them.
Albert

Yet another question for you!
Can some one tell me what points and areas to look at please as my Mini
shakes and rattles about at 50 through to 60 MPH. (1989 110,000 mile mini)
I have replaced all of the rear suspention componants in order to stop the

Help required.
I have a pre-engaged starter motor on my '89 Mini 1000 and when I turn the
ignition key it just clicks. It takes several attempts at turning the key
before the motor turns. Can anyone explain what is causing this and is

Whilst looking for the light hum coming from the NSF I decided to strip the
wheelbearing...only to find the outer spinning merrily inside the hub
(15thou feeler gauge will fit between the hub & outer bearing) so I am
looking for a hub for a '90 mini Neon with disc brakes. (or an ...

I'm working on an '89 Mini - the brakes are dual circuit front/rear.
The master cylinder, pipes and calipers have been replaced all round.
Having bled the front and rear circuits, the rear brakes are working
fine. However the front brakes do not work. Bleeding them again and

I was having some fun with our resident troll, but its got really boring and
predictable. Can someone advise me how to set up the kill file? if thats
what its called so I can just ignore her...

Never thought about the head gasket but the oil and water are both clean as
a whistle.
later  Gary