I am retired on low budget and trying to find free wiring diagram on 1989 d50 pickup. I am trying to fix my horn. I have the 2.0 L engine, standard tranmission

Hi all, Hope you can helpme. I have a 1992 diamante and the compressor for
the suspension system is dead. My local mitsu. dealer said it would cost
like $1400.00 to replace it!! Can I just install regular shocks and struts
in this thing, or maybe put some kind of hook-up so I can ...

      What do I need to remove the white scratches with out damaging the
paint? The scratches are not very deep but I would like to remove them. Any
suggestions, would greatly be apperciated.
Daniel Cobble

Does anyone know a good (reliable!) place to get parts for a 99 Eclipse
Spyder besides the dealership?  I have had places give me wrong parts such
as spark plugs because they assume it is the same part as the coupe.

The items for sale include all of the engine components,including fuel
injection parts,fuel pump,new starter,new alternator,new radiator,new
exhaust system,electrical,electronic,E.C.U.,wiring harnesses,power steering
pump,power steering box,front end components including front axel

I have an '03 Eclipse with almost 38K miles.  I am just now getting around
to taking it in for it's 30K mile tune up.  The factory plugs are still in
of course, and I am wondering if it is going to make a difference if I have
Platinum plugs put on?  Will it make a noticeable ...

recently put a 2.0 dohc n/a into my 93 eclipse  and just got it running but
i have a problem with it idleing way to high  idle screw is set to the
lowest possible but im still idleing at about 4000 rpm  the motor is out of
a 97 galant when i put it in the car the camshaft position ...

I have recently bought a 1996 Mits Pajero 2.8 SWB and thinks thats it one of
the best cars I have ever owned.
However somewhat prepared for a low miles per gallon I thought that 18mpg is
low for gentle way I drive this monster.

Can anyone tell me is it safe or possible to disconnect the water flow that
heats up the intake manifold? My son's car has a serious leak and he has no
money so if I can just bypass the manifold it'll keep him mobile in the
short term

hello, just have a quick question and wondering if i can get some
answer from you guys.  if i am installing a brand new airbags, is
there such thing as the "front impact sensor" that i need to install
somewhere around the front bumper?  i have a 98 eclipse gs-t and

Subject: 3000GT SL 95 2WD 3.0 Coolant Problem - Water/Antifreeze
Evaporating?
Hey eveyone,
Just wondering if anyone can help me with this coolant problem for my 1995

I've been having engine problems with my Colt for about a year but it's got to the point where I'm totally out of ideas. I've been trying all sorts of fixes suggested by members of many forums but nothing seems to help.
Here's the spec:-
Mitsubishi Colt
UK 1.3i (4g13 engine)

Hi all, I have just joined this group today.
I have a 1988 Mitsubishi Delica 4WD Van, manual 5 speed, petrol, 2 Litre.
I'm having a headlight problem. When I turn the headlights on to normal (low
beam), the outer lamps come on just fine. But when I either "flash" the high

I am trying to troubleshoot a CEL light that comes on from time to time
staying on for a week then going off. What I notice is that the air/fuel
guage stays lean for a long time (abnormal) then after the car is running
for a while it will toggle back and forth (normal). My question ...

I'm purchasing a 2003 Galant and I notice that there seems to be no engine
guard underneath the car. From the bumper to the motor it's all exposed. Is
that normal?
If not can it be added?