| Thread | Last Post | Replies |
|
| Mitsubishi Shop manuals | 09 Mar 2004 22:19 GMT | 3 |
Anyone know where i can get Mitsubishi shop/repair manuals for a 96 Galant
and 99 Mirage/Lancer? Don't want chilton or haynes, but the one by
mitsubishi.
TIA
|
| Compression drops 40-PSI after 500 miles - normal? [Mitsubishi/Dodge Eclipse-Talon `94, 1.8 lt.] | 09 Mar 2004 01:15 GMT | 8 |
I had the head professional done to the point of sparkling clean.
I apply 20w-50 synthetic oils to the cylinder walls and install the
head, torque in three steps to 72 lb using genuine gasket. I
check the compression and they read 190, 190, 190, 200-psi.
|
| eclipse IAT sensor | 08 Mar 2004 13:05 GMT | 3 |
can anyone tell me where the IAT(Intake Air Temperature) sensor is located on a 2003 mitsubishi eclipse GT?
|
| Alguien de Florida | 07 Mar 2004 23:25 GMT | 1 |
Hola, necesito hacer un encargo de repuesto para un automovil Mitsubishi, Mirage, año 1995, el computador murio, es el de mi hija y deseo comprar uno nuevo o segunda mano, vivo en Iquique, Chile y aqui no lo hay.
Agradeceré cualquier dato o sugerencia.
Oscar
oshar@entelchile.net
|
| WON'T CRANK OVER - 1980 Sigma (2600 Astron) - Australia | 07 Mar 2004 19:09 GMT | 1 |
Would really appreciate some help from someone if you can please.
I've got a 1980 Mitsubishi Sigma, 2600 Astron - Automatic.
Car runs perfect except does not like starting in the mornings after
been left over nite.
|
| Spacewagon - change of "toothbelt" in motor | 07 Mar 2004 01:15 GMT | 1 |
Anybody know the number of workinghours and spareparts needed to change the
"toothbelt" (whats the rigth name for it) in a SpaceWagon 2,4 GDI motor (3
years old)
Thanks in advance.
|
| At what point does a car become not worth keeping? | 06 Mar 2004 17:49 GMT | 48 |
I thought I'd get a little cost/benefit analysis discussion going. I've always
thought the best used-car deals were ones between, oh, 2 and 8 years old. If
it's too new, you might as well buy new, but if it's too old, you're just asking
for trouble, right? What's the average ...
|
| After front break pad replacement | 04 Mar 2004 14:54 GMT | 7 |
After I replaced the front brake pads I could smell burning coming from the
front right wheel. Well the caliper was to hot to touch and it was burning.
The replacement went what I thought without any issues. I used mitsubishi
pads and replaced these medal clips inside. The old pads ...
|
| 1990 Montero LS | 01 Mar 2004 18:52 GMT | 2 |
My 1990 Montero LS seems to be running very hot. The temperature gage shows
that it is normal, but when you get out it smells very hot...Like it is
running low on antifreeze. The radiator is full so I am not sure what it is.
I have only owned this Montero for a month and I bought it ...
|
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage
Start New Thread