| Thread | Last Post | Replies |
|
| 2004 lancer seatbelt minder?? | 19 Oct 2004 01:32 GMT | 1 |
My girl friend just got a new lancer.. Does anyone know how to stop that stupid beeping if the driver doesnt have their seat belt on ? I have a ford and the manual tells you how to do it .. I read her manual twice and didet see anything ....
|
| Mitsubishi 3500v6 Engine | 18 Oct 2004 23:13 GMT | 1 |
Hi.I have a 1994 Mitsubihi Pajero Shogun V6 24 Valve.I need an engine. The Chassis # CONV45ORJ00107 Engine # 6G74D96174 Can you help me telephone # 246-437-0263 / 246-2629317 email nickiepoo30@yahoo.com
|
| 91 eagle talon won't start | 18 Oct 2004 02:09 GMT | 11 |
1991 eagle talon, cranks but won't fire/start - New replacement parts already include Brand new ecu, camshaft position sensor, ignition power transistor, both coil packs, plugs & wires, the MFI relay; In addition, the wiring harness connecting these ignition parts and
|
| l300 1986 campervan mpg | 18 Oct 2004 01:46 GMT | 1 |
please could somebody tell me what the average miles per gallon from a 1986 1.6l petrol van based campervan I am currently getting about 22-25mpg on a good run fully loaded (wife&two kids) with all gear .
|
| What can you tell me about Legnums? | 18 Oct 2004 01:41 GMT | 1 |
I am looking at buying a 1997 Mitsubishi Legnum STR, the V6 2.5l model. I have heard bad things about this vehicle, both in terms of it's fuel economy, and it's reliability, however I really like the vehicle. Can anyone give me some pointers regarding this vehicle (either negative
|
| Help..Glowing exhuast manifold | 18 Oct 2004 01:31 GMT | 7 |
I have a 1988 Starion w/turbo. After short drives, I notice the exhaust manifold glows slightly. (viewed in the dark) The compression on all 4 is good, (120PSI), and the ignition timimg is set at 10BTDC.
|
| 96 Talon AWD - Check Engine light? | 17 Oct 2004 08:14 GMT | 4 |
Car has about 95k on her and today the check engine light came on. I have an air fuel guage and did notice that the guage stayed on lean for quite some time, oh and it was really cold her today. Live in Tampa FL. Anyway, when first starting the car in the am the guage will slowly go ...
|
| mirage guages | 15 Oct 2004 22:58 GMT | 1 |
could anyone tell me if there is a master ground for the instrument panel? i am having some wierd readings from my fuel and temp guages (only guages except for the speedo). actually the fuel reads always empty and the temp seems very low. not sure where these are grounded also the ...
|
| a hmmm question | 13 Oct 2004 01:14 GMT | 9 |
ok so here goes.. i have a 91 eclipse gs.. that i blew the engine up in.. i tore it out and sent it off to the machine shop.. in the proccess i found a 91 gst engine and after some pondering decided that i would really like to have a turbo.. then with some research i found that i ...
|
| 4g92 valve tuning | 11 Oct 2004 19:26 GMT | 3 |
I have a 1998 Carisma 1.6 with a 4g92 16V SOHC. Does anyone knows if it has an automatic valve tuning system? I've asked in several places and some say it does, but others say that the automatic tuning was put only in the 4g93 1.8 DOHC engines.
|
| Brake pads | 11 Oct 2004 06:47 GMT | 2 |
I just put a set of drilled and slotted rotors on my car and I have to replace the pads before winter. Does anyone know of a good set that work with these rotors?
|
| Vacuum Hoses | 10 Oct 2004 21:59 GMT | 2 |
Can anyone help with a diagram of where the vacuum hoses route to/from the inlet manifold and throttle body on a 3.5 V6 Pajero many thanks
|
| Pajero 2.8Tdi injection pump removal | 10 Oct 2004 14:39 GMT | 1 |
I'm trying to remove injection pump to replace leaking seals and after dismantling ancilliaries find that I cannot withdraw pump from housing. I have removed all three bolts but pump refuses to budge. Do I need to use more force(I dont know how pump drive shaft locates in drive ...
|
| tons of problems | 10 Oct 2004 02:31 GMT | 9 |
I recently bought a 97 eclipse GS. I'm trying to get her running like brand new but I have run into 3 problems. First I installed an intake system. I get the "whistles" that I hear mean that there is an air leak. How can I find/fix this? My next question is on the mechanical ...
|
| 96 Eclipse Spyder antenna wiring | 09 Oct 2004 02:48 GMT | 1 |
I'm replacing the failed OEM power antenna with an aftermarket one. and as the new one uses two wires 12v, and radio switched 12v for a trigger, I'm wondering if anyone knows the correct color wire to use for the trigger. There are a lot more than two wires at the OEM antenna ...
|