97 Galant ES 2.4L FWD 92Kmile, Ottawa Canada. Lower ball joint was
replaced in 2001 as a part of recall.
I took the car recently to a local shop for front suspension check, and
they told me that the lower ball joint is bad. They showed me the lower

My 2003 Outlander's (electric) condenser fan stays on after turning the
vehicle off.  I realize that if it's very hot outside, the fan may run
for a few seconds after turning the engine off, but this happens
everytime, even in cool weather or after very short drives.  Now it is

Does anyone know why i can rarely get my year 2000 mitsubishi spacestar to
engage 5th gear, it always goes back to 3rd no matter how hard i push the
lever but sometimes it slips in without a problem. CHEERS FOR ANY HELP.

I just replaced my alternator, and noticed that my high beams suddenly
don't work.  Could this be a fuse?  Both bulbs blown at the same time?
The switch works, because when I pull the stalk the fog lights go out
as they would with the high beams working.  If one bulb is bad, can

The car came equipped with 175/65R/14 tires which are now due for
replacement. Has anyone used 185/60R/14 as a replacement? Any
clearance problems in the wheel well?
TIA

I have had problems turning the temp control knob for a while, but now it won't  turn at all
I have a '03 Lancer ES, I live in the desert, so Idon't need toswitch it very often, but when I do, it's diffacult to turn
Has anyone else had this problem? and know how to fix the ...

I have a 1996 Carisma, that I am now having a spot of trouble with.
From cold, the engine starts first time.  After driving a few miles, the
engine warning light comes on and the engine judders randomly.  The car
keeps going fine, but when I stop the engine, and try to start again ...

When parking one day I put my 97 Eclipse RS I noticed that The shifter
would not "Click" into park. The car is definately in park 'cause the
tranny locks up but, now the ignition key won't completly switch off and I
can not remove the key. HELP!!!

I am looking at replacing my stock plugs and wires with SplitFire plugs and
wires. Any input on whether this is my best choice? I am looking for gas
saving options primarily. I have a 2002 4cyl GT.

Which is the preferred choice for bed liners,under or over the edge? I feel
under looks cleaner but over seems more practical.
Tia
Rick

My Proton Saga's 4G15P engine's distributor cap did not have a gasket,
dust got in & blocked electrons' flow from cap's centre pin to rotor.  I
had to make this gasket myself.  Neither does a 6G72 engine's distributor
have a gasket, same consequence.

My Lancer was on and in park and kept revving, then it just turned off. I
started it again and it was fine, but I'm worried. I've never had any
problems before.

Mitsu 96 Galant has the tail/stop lights staying on when car is turned off.
Discovered that the brake pedal lever is not touching the brake light
switch. Found a broken part (grommet/bumper??) that's supposed to fit in a
hole in the lever and touches the brake light switch. ...

I have a couple of quick questions:
When I start the car these days, the volt light and brake light (dash) both
come on, and stay on for a while.  Revving the engine eventually makes both
lights go out.  Is this a sign of an electrical problem?  Bad alternator

I'm trying to protect my EVO during the winter here in NH.  Has anyone any
experience using a car cover in the winter?
Dave