| Thread | Last Post | Replies |
|
| Lancer heels | 30 Jun 2006 09:20 GMT | 3 |
Will wheels from an Evolution fit a stock Lancer ES without a problem. I'd like to dress my simple little Lancer up a bit and thought I'd keep it "in the family". Don't want to go all out, just rims and window tinting will do it.
|
| L200 4wd repower | 29 Jun 2006 23:08 GMT | 1 |
Guys I'm hoping you can help. I've got a Mint 1 owner 100,000k L200 2.0 4wd ute but the old guy that had the ute drove slow and short. i use it alot now but need more power to tow etc. The engine I think is a g63bSOHC. What engines can i bolt in or parts to add on that will
|
| Problems with cooling system | 28 Jun 2006 21:32 GMT | 3 |
I have a 2000 Mitsubishi Eclipse GT with a V6 engine. About a month and a half ago, my radiator cracked at the top so I changed it for a new one. As I did and started up my car to take it home, I noticed that the water in the radiator reserve tank was being
|
| 1st Time Mitsu Owner | 26 Jun 2006 19:03 GMT | 2 |
Picked up a used 2005 Lancer ES last night for a great price. So far (one day, Ha) we love it. It's a little anemic as far as power but we were looking for good gas mileage. Anyway, thought I'd introduce myself as I'll be watching, and hopefully, contributing to this group now.
|
| Lancer - engine ticking noise | 26 Jun 2006 11:29 GMT | 2 |
I've got a 2003 Lancer OZ with 125,000 Km. I've started to hear a ticking noise, I changed the oil and it is still there. Sounds like tappets, althogh I would have thought there would be some sort of hydralic/automatic adjustment.
|
| PAJERO, Honda MR-V and Toyota PRADO | 26 Jun 2006 01:49 GMT | 1 |
I'm trying to make comparison between Mitsubishi Pajera and Honda MR-V and Toyota PRADO. One of the differences I found is the engine. For example Honda has VTEC/ ECD-2, while Toyota has DOHC engine. So, I wanted to know what's
|
| Air-conditioner light blinking: "compressor problem" according to manual | 24 Jun 2006 12:58 GMT | 1 |
2000 Mitsubishi Galant ES V6 (3.0L) As I was driving today the air-conditioning stopped working, and when I glanced over to the fan-control knob/air-con switch, I noticed that the green LED indicator was blinking instead of being solid. Having never
|
| 96 eagle summit wagon quits suddenly | 24 Jun 2006 12:49 GMT | 1 |
96 eagle summit wagon quits suddently. Changed fuel pump and it quit again. Could it be the distributor? computer? What's your experience? Also can you recommend a mechanic in Chicago area?
|
| Colt-91 ECU problem | 24 Jun 2006 07:17 GMT | 4 |
A customer brought an ecu for a Colt-91. He claims it doesn't drive either injectors or ignition. He also told me that this is a common fault on these cars. I found one leaky electrolytic cap, replaced, but still doesn't operate.
|
| uneven idle speed on Mitsubishi Eclipse 2.0 m.y.1991 | 23 Jun 2006 23:47 GMT | 9 |
I have the a.m. car, I changed both ECM and ISC but the idle speed is still uneven, especially when the cooling fan and the air conditioner are running together. Might it be poor battery condition, or air intake control failure, or what?
|
| Follow up: 1997 Galant: idle surging problem | 20 Jun 2006 11:56 GMT | 1 |
Its about my 97 Galant ES 95k miles with auto trans. I was experiencing idle surge with check engine light ON. The dealer extracted code P0505 Idle speed control circuit problem and conculded bad ISC motor. The motor assembly was changed two weeks back. The car was running fine,
|
| Low pressure A/C valve location.... | 19 Jun 2006 06:09 GMT | 6 |
My 1998 Eagle Talon AWD turbo a/c is not blowing quite as cold as usual. I have a can of R134 recharger but not sure where to hook it up. The can says to hook into the Low pressure line near the firewall. On my car the only valve back toward the firewall has a blue cap on it
|
| Site for 1986 magna elites | 18 Jun 2006 10:21 GMT | 1 |
Does any one know if there is a site i can go to and get info on the carb type magna elite ?? Thanx ppl Peter
|
| 1995 Mitsubishi Galante Bucking & Cutting Off | 16 Jun 2006 04:03 GMT | 1 |
Could someone please give me the answer to why my car is cutting off & bucking. I've changed the battery, the distributor & caps. What could this possibly be? PLEASE HELP!
|
| 99 Spyder crankshaft pulley | 16 Jun 2006 03:12 GMT | 2 |
I have a 1999 eclipse spyder; the crankshaft pulley fell off and it does not appear to have mounting hardware. I put the pulley back on but a few days later it fell off again. Is this something that needs to be pressed on or somehow permanently mounted,or does worn belts/not ...
|