I have a 2004 mitsubishi lancer ralliart sedan with around 38,000 miles on
it. Today I started noticing a grinding sound coming from underneath the
car. The sound only happens when the car is in motion, and doesnt do it
when i rev up the engine. The sound also doesnt change pitch ...

I HAVE JUST CHANGED THE BATTERY ON MY 98 MAGNA & NOW THE RADIO NEEDS TO
BE
RE-CODED, DOES ANYONE HAVE ANY IDEA AS TO WHAT THIS MAY BE, THANKYOU!!

I've bought the new stereo and a wire harness to connect it to the existing
connections but I'm really not sure where to connect the ground lead coming
from the wire harness.  Where should I connect it?

Seems the ECS Compressor decided to call it quits on my 1992 GTX
Local Chrysler dealership can't even find a part number let alone find
me the part
Would anyone happen to

hey...has anyone here replaced the atnena?...do i have to remove the
fender to do this?

  My daughter has a 97 Eclipse (FWD, Non-turbo) that is needing a
clutch replacement.  How big of a job is that to do myself?  Or
conversly, how much should she expect to pay to have it changed at a
shop?

Ever since I bought this 1992 Plym Laser 2.0 DOHC, I've noticed gas
fumes, a little stronger after a fillup when the level is up above a 1/2
tank, then noticable when cornering. It seems to be coming from the
outside because its stronger when you open the windows.

No spark, one morning it just wouldn't start.  What is it most likely
to be?  How do you test the computer and crank angle sensor in
distributor ?  Has 3.0 Mitsubushi V-6.  Thanks.

I replaced the A/C clutch on our 99 Mitusbishi Montero Sport. After
installing, when I push the a/c button, I do not hear the clutch engage like
I used to prior to replacement. I think the possible problems are
below. Can you comment on what you think?

I've recently found out about pumps you can buy to change your oil from the
TOP of the engine, through the dipstick tube.  I live in an apartment, and I
don't really have anywhere to put my car on jackstands to change the oil
otherwise... the pumps cost about $30-$50, depending on ...