| Thread | Last Post | Replies |
|
| 3000 GT | 29 Nov 2006 16:31 GMT | 3 |
Hey all, I just got a 3000 GT and was looking for some chatter about these cars. Picked one up inexpensively because the dealer said it had a rod knock. I've traced it down to a loose bolt in the clutch. Arrgh, and I have to
|
| 1990 eclipse gsx rpm gauge | 27 Nov 2006 05:53 GMT | 1 |
ok you should i have a 90 eclipse gsx. One day i was cruzing around and all my lights and gauges was flickering on and off. And my alternater was charging my battery at 18 volts. would anybody know whats wrong with my car? oh i brought a new
|
| 1986 magna | 26 Nov 2006 09:48 GMT | 2 |
Today when i started u the car to drive to work, it sounded like it was running on 3 cylinders. The day before the car was fine. Can any tell me what could be causing this minor problem. It's a pure work car and is only driven to and from work, a paltry 20 kms per day, but it has ...
|
| 92 Eclipse | 14 Nov 2006 04:42 GMT | 5 |
I just purchased a nice eclipse for 150 it is a 92. When I say nice I mean the body and the interior is nice. The car however does not start. I was told the car needs clutch. When I went to pick up the title and keys I attempted to start it. When the car is in neutral and
|
| Balance shaft timing on Galant 2.0 SOC engine | 14 Nov 2006 02:49 GMT | 1 |
I have seen numerous posts about the balance shaft timing issues on this Mitsubishi 2.0 engine. I have tried twice now to get the timing right without using the screwdriver (8 mm rod) to check the shaft position, and I still have a vibration in the engine. The problem is
|
| 95 mits. galant auto 155000mi | 13 Nov 2006 21:09 GMT | 2 |
hi, as previously noted here my car would start and stall it does run just keeps stalling.i was told i need an engine or a valve job. after everything was supposedly checked including compression test #1 cylinder 200lb. #2 cyl.200lb
|
| 90 MONTERO WON'T START--WHAT TO LOOK FOR ??? | 13 Nov 2006 20:32 GMT | 1 |
Already replaced the cap, rotor, entire distributor and engine computer. Does not fire at all. Has anyone else had this problem and, if so, what was done to solve it? Has the 3.0 V-6. Thanks in advance. Also, when doing the diagnostic test, the check engine light does not
|
| 1989 Mitsubishi Galant LS wont start | 12 Nov 2006 22:08 GMT | 4 |
Hey guys i just recenetly bought a 1989 Mitsubishi Galant LS... when i go to start it.. i dont get no power to the distrabutor or the plugs... i first thought the ignition coil... had that checked its fine.. bought new plugs and had dist checked there fine... i bought a new Engine
|
| 96 Radio in 97 Galant | 11 Nov 2006 22:13 GMT | 2 |
Last spring, the radio in my 1997 Galant was replaced with one from a salvage yard(from a 1996 car, if I recall correctly). Standard AM/FM/cassette player, no CD. It seems that the replacement turns itself off when the car is turned off, and has one or two pre-set stations that ...
|
| Space Wagon 96 Petrol 2.0 GLXi - Won't fire up... | 04 Nov 2006 22:29 GMT | 1 |
My Space Wagon '96 Petrol 2.0 GLXi just cut-out on Friday night, and now refuses to start. I checked the plugs for a spark, that was OK, but still changed distributor cap / rotor arm / plugs - just in case, and still nothing. Fuel appears to be reaching the cylinders too. So I ...
|
| 4G63T Low oil pressure after rebuild | 03 Nov 2006 14:45 GMT | 3 |
Well, I've got a question this time... Just had the 4G63T rebuilt with new pistons after an unexpected ring failure after less than 15000 km. Prior to this rebuild oil pressure as indicated on the std 1G gauge was just above the low mark once the engine
|