| Thread | Last Post | Replies |
|
| Outlander rust in rear door, what to do? | 26 Feb 2007 18:58 GMT | 3 |
I have a 2004 Outlander, that has a bit of rust in the rear door. It is not much, I just want to be absolutely sure it does not spread, and preferably stops developing. I used to grind my old car's door, give it some paint, and then it looked good for about two months till it ...
|
| 89 Eclipse adjustment | 26 Feb 2007 12:22 GMT | 3 |
A friend has one of those cars with the 1.5L engine and manual transmission. We recently finished rebuilding the engine and started the car. It works but we need to adjust the idle. Problem is we only have the Haynes manual and it refers to a label on the hood, but there are
|
| 93 summit keeps bogging down on me | 24 Feb 2007 20:48 GMT | 2 |
Hi Stewart, I have just switched motors in my 93 eagle summit with a 96 mirage motor.I have had to change the wiring computer ect,from the replies I have received from you previously.That all worked out for me I have the car running and
|
| Stewart.....I need help | 24 Feb 2007 14:54 GMT | 1 |
hey man: how is my guru doing? Anyway my friend has a late model Mini(yes i know girls car). Her shop whats to charge her $600 for a basic service. I know I can do it for less,so my question is what do you know about the
|
| Click Click- dead? | 24 Feb 2007 00:01 GMT | 2 |
I have a 1992 Dodge Stealth/3000GT it seems to run fine until I come to a stop. I hear a "click" sound coming from my center console and everything goes dead. I eventually just got mad at it and kicked the console, it "clicked" again and everything came back on. I know the ecm is ...
|
| What's the Trick in Getting the Socket Detached from a Galant 01 Headlight? | 22 Feb 2007 11:22 GMT | 3 |
I would think a straight pull-back would work. Dont see any ears that need squeezing. Or do you push, twist and pull, something like that I've tried that and nothing either. Thanks for help!
|
| n/a JDM 4G63 vs US 4G63 | 21 Feb 2007 01:26 GMT | 2 |
Looking at a couple of JDM engine inporter sites, the normally aspirated JDM 4G63 (ECI-Multi) is rated at 170hp, while the US/Canadian 4G63 is rated at a mere 135hp. I could understand another 5-10 hp due to higher octane fuel and different emisisons standards, but to get 35hp ...
|
| Coolant Resevoir Tank | 20 Feb 2007 04:27 GMT | 3 |
Hey there-- I had a fender bender and there was some damage to my 97 gallant right front side, and I'm trying to put it back together. I've got the Haynes manual and the official service manual, but I'm still having
|
| 95 3000GT for Sale | 18 Feb 2007 08:49 GMT | 6 |
I have a 1995 3000GT for sale. I am the only owner. Has a little over 1k miles Anyone interested?
|
| Red exclamtion mark in a circle? ’94 Lancer | 13 Feb 2007 05:26 GMT | 2 |
I have a 1994 Mitsubishi Lancer that has had a red exclamtion mark in a circle, warning light come on. My brother thinks that maybe it is low on break fluid or the break pads are wearing out. Does anyone know? I bought the car without a manual and can’t find much info
|
| Pajero | 12 Feb 2007 02:04 GMT | 4 |
looking at getting a pajero 2800. can you please tell me of any problems i should be looking for. Cheers CF
|
| ok stewart how did ya learn so much about Mitsubishis | 10 Feb 2007 00:15 GMT | 4 |
I would like to reach the next plane so i must ask my guru wear to start. the longer ive owned my montero the more i love mitsubishi. When i lived in california i had a mitsubishi MT1601D tractor with a 3bk motor i loved it and the montero and the tractor shared some parts. Cant
|
| clutch replacement | 09 Feb 2007 00:40 GMT | 1 |
can anyone tell me how to get the half shafts out of the trans on a 01 2.4 spyder thankx billy
|
| 1994 mitsubishi diamanta | 06 Feb 2007 12:53 GMT | 2 |
Can anyone help me with a idling problem at cold start? There is no idle or a very high idle around 2000rpm. --
|
| 95-99 Eclipse | 05 Feb 2007 23:15 GMT | 4 |
Is there anyway I can get a 1995-1999 Mitsubishi Eclipse GSX made from a factory still? If not, is there a way I can atleast get the body brand new and everything I would need to build it brand new?
|