I just replaced the front rotors and pads/shims.  Now the front left
rotor is turning blue from heat & it looks like the caliper must be
seizing a little.  There is no pulsating, so the rotor is not warped
badly yet.

on my '99 SE after 55K miles.   Yeah, it's my fault, don't go there......
Any recommendations on which brand to get?  I've heard there are aftermarket
clutches much better than OEM.

I'm on my third changer (warranty so far).  The original and the first
replacement skipped (failed to track).  This was most notable on factory CDs
and far, far less on my home burned CDR and even CDRW.  I have the third one
now and this one tracks way better (so far) but ...

I just bought a 2002 Maxima SE from Planet Honda - Union NJ.  it is a
very nice car - black in and out, leather, 6 speed manual, with 20,100
miles.  i got a very good price on the car.
the carfax report on the car showed no findings.  no accidents, no

I just replaced the stock JUNK tires with the Michelin Pilot Sport A/S tires
after doing some research and seeing that those are "the best."  I paid $832
out the door, installed, balanced and with the tire protection plan.... was
that a good price?

I recently got this 6 speed and getting a grinding noise (not always
but most of the times) when I shift from 2 to 3. I make sure the
clutch is floored all the way in.
The dealer says the problem can not be duplicated and it is as per the

I have a 1995 Maxima GXE. Currently my snow sires are mounted on Steel Rims,
with hubcaps.
Every year I have been changing the snow tires and summer tires, back and
forth. I have been told that this does no harm, but it seems to me that the

Anyone know a good source for the inside Micro Filter. Dealer wants $80.00
to replace. Looks like its worth about $5.00

This is my first time posting here, and I'm hoping that someone can
help diagnose a problem I'm having with my 1997 Nissan Maxima (with
129,000 miles).  When I go to start it in the mornings, it often
sputters and stalls out on the first attempt, as if it is either

Went to change out the Plenum and rear valve cover gaskets this weekend and
almost made it.  This is one tough job.  The only thing that kept me from
getting the Plenum off was 3 hoses (2, 1/4 inchers and 1, 1/2 incher) on the
under side of the throttle body.  These things are ...

I recently bought a new maxima, and it has the name of the dealer on the
back.  It is like a white sticker, but each letter is seperate (its not
just one big sticker)
I want to remove it.  Does anyone have any suggestions as to how I can

I'm shopping around for a used Maxima and I'm wonder if I should avoid the
first (2000) year they came out. Are there known problems with this year
which will plague me or it doesn't matter which one I get? Certain issues
come into mind, Coil pack replacement, Transmission ...

Can't seem to get rid of the upper shroud cover after removing all (?)
bolts. Is there possibly a bolt connecting the upper shroud with the
lower, and any hints on how to get to it? Thanx

I just got a 2000 Maxima and, I would like to have a user guide or manual.
Can any1 help me please ????
Thankx

When I make a sharp turn in the car like parking for instance the car makes
a clunking noise. Any idea what causes this.