| Thread | Last Post | Replies |
|
| 96 Maxima air bags | 31 May 2005 21:55 GMT | 1 |
I disconnected both airbags to change a radio as advised for precaution. After reconnecting airbags and battery, now I get airbag flashing warning light. Is there a reset required and if so, how is it done?
|
| Tire issue - yet again... | 31 May 2005 21:21 GMT | 4 |
I know this issue about tires have come up again and again. But mine is little bit specific to Boston, MA area. I am moving to Boston and want to replace tires on my '02 maxima. Currently I have OEM (Bridgestone potenza), as most you have mentioned they suck in Rain/Snow, and ...
|
| Over heating | 31 May 2005 19:47 GMT | 2 |
Whenever my 1991 Max is setting still or idling for about 5 to 10 minutes it overheats, but as long as I am driving it is find. Any help would be greatly appreciated
|
| noise | 31 May 2005 17:50 GMT | 3 |
Question is on wifes 99 maxima. Car has always been noise free, very quiet. Lately, last couple of weeks, have like a roaring sound from front. Kinda like when you have new tires that are not really as quiet as you think they should be. I rotated tires thinking I might have one ...
|
| Fuse Panel Cover | 31 May 2005 11:36 GMT | 1 |
I have a 96 Maxima GXE and I lost the Fuse Panel Cover under th steering wheel. Does any one have an idea where I can find replacement or at least a picture so I can tell which fuse control what? Thank you
|
| Popping/Creaking in front suspension | 30 May 2005 19:45 GMT | 7 |
I recently changed my clutch, rebooted my front axles, installed urethane control arm bushings, and replaced my inner tie rods in one job. About 500mi later I'm getting a popping/creaking only when I accelerate from a stop, and it occurs about 1-2 secs after I start - right about ...
|
| Pep boys for tires? anyone? | 30 May 2005 09:59 GMT | 13 |
I went to pep boys looking at tires today and they had a set of Hankock Optomo tires for about 90 bucks a tire, was wondering if anyones used these before? also had question about their "Futura" brand and if anyone has used them, looking for an all season thats decent in snow up ...
|
| A/C | 29 May 2005 23:31 GMT | 2 |
Hey--- a fam. member has a 99 LXE maxima .. the A/C isnt working .. I was putting a can of ac in and the compressor made a horrible noise and squirted fluid out .. maybe there's too much pressure in there ..
|
| 99 max TCM | 29 May 2005 12:29 GMT | 1 |
has anyone priced a TCM for a 99 Maxima?
|
| Code P0505 | 29 May 2005 05:42 GMT | 1 |
I have a P505 code on my 2000 Maxima SE at 128.4K miles. My research say this is as Idle Control Valve/Aux Air Valve. SOunds resonable as the idle is bad (1500 RPM). I'd like to know the approx. cost to have it replaced if anyone has a clue. I don't think this is something I want to ...
|
| maxima 2000 codes | 29 May 2005 05:17 GMT | 4 |
My daughter has a maxima 2000 .The problem she is having is intermittenly the car runs rough and even at high speeds 90mph it seems it's holding back some power.We just had all 6 coils replaced because of the codes that came up . That went away but now we are getting codes PO171 and ...
|
| Electrick Lock problem | 29 May 2005 03:15 GMT | 1 |
I have 96 Maxima with about 80k on it, and it is running smooth. Las few years, it appears that door locks on my car has gotten bi sensitive. If you try to unlock it from inside, it locks/unlocks several time, an
|
| Is there such a thing as a 2006 Nissan Maxima in the works? | 28 May 2005 01:55 GMT | 1 |
Changes over 2005? I have a 2001 but like to hear what is going on with these great cars. Thanks, Patty
|
| 2000 maxima SE - 5000 RPM, 90% throttle - cylinder cuts out | 27 May 2005 08:00 GMT | 3 |
2000 maxima SE - 5000 RPM, 90% throttle - cylinder cuts out Symptoms: 1. In second gear accelerate with pedal to the floor. At 4-5000 RPM let up on the throttle a bit and there is a sudden loss of power. It feels like 1
|
| changing rear brake pads | 26 May 2005 05:22 GMT | 5 |
I just changed front brake pads on wifes 99 maxima, now need to replace rear pads. Seems like last time I tried, had trouble removing pads and ended up taking to mechanic. Could someone give me some tips on removing these rear pads. Thanks for any help.
|