| Thread | Last Post | Replies |
|
| Attn: Nirav | 31 Aug 2005 19:04 GMT | 6 |
Hey dude, How did your valve cover and gasket job go?
|
| 1997 maxima check engine code | 31 Aug 2005 03:03 GMT | 1 |
my '97 maxima has a check engine code p0500(vehicle speed sensor or circuit fault). the speedometer sometimes works, i replaced the vehicle speed sensor but no help. i replace the instrument cluster from ebay and solve the
|
| Battery Terminal Corrosion | 30 Aug 2005 19:24 GMT | 6 |
Well, I've been seeing significant corrosion buildup on my battery positive terminal for at least a year. At first I tried cleaning the post/terminal to bare metal but the corrosion came back. When I changed my clutch I cleaned all the connection points to the starter and ...
|
| higher rpm hesitation | 30 Aug 2005 14:53 GMT | 1 |
I have a 2000 model and has you accelerate the engine hesitates at around 4500 rpm and then continues smoothly to redline. I just had the clutch hydraulics repaired as the slave cylinder craped out. A friendly mechanic suggested (before the clutch repair) the clutch could of ...
|
| Whoa is Me - 95Max | 29 Aug 2005 15:59 GMT | 1 |
I wrote earlier about a dead motor and received several interesting suggestions. It turned out to be a short in the wiring harness. Fixed. Now, when I try to start the car in the morning it fights me all the way. Uh-UH-Uh poop. Gas. Uh-Uh-Uh. Pop. Fart. Gas. Starts finally.
|
| AWD Sedan - What to get | 28 Aug 2005 02:28 GMT | 7 |
I'm seriously looking to replace my '91 SE (too many miles), but I now live in Snow Country, and really need AWD to get around. I'm not keen on a full-sized SUV, but would consider a mini-SUV, but really prefer a car or wagon with AWD. Does Nissan have any plans for an AWD ...
|
| 2004 Max SE- 6 speed manual hard shift question | 27 Aug 2005 15:57 GMT | 2 |
I have a 2004 Maxima SE 6 speed Manual transmission, and it is at 29K. Within the last few days, I have noticed that when cold, it is difficult to get into 3'rd and higher for awhile and shifting sounds 'mechanical' rather than smooth. Seems that after I drive it for a bit, it ...
|
| NGK plugs = performance | 26 Aug 2005 08:19 GMT | 6 |
Code indicated a misfire in the 1st cylinder. Took NissTech's advice and put in the correct NGK plugs for my 99 GLE. They were $10 apiece at Autozone or Advance Auto, but well worth it. Also replaced the air filter. Bosch platinum plugs stole my horsepower! Threw those suckers in ...
|
| FS: 2000-2005 NISSAN SENTRAs SERVICE/SHOP manual - CD (NOT generic, NOT Haynes/Chilton cheap repair books!!) | 26 Aug 2005 01:09 GMT | 2 |
Posted on Ebay, item# 7995514907. Goto www.ebay.com and enter "7995514907" (without quotation marks) into search window (or item#, etc.); BUY NOW OPTION is AVAILABLE, i.e. NO need to wait for Auction end - buynow set to $59. Those who think too expensive and don't know anything ...
|
| 2000 Nissan Maxima Headlight Problem | 25 Aug 2005 18:06 GMT | 6 |
My low beam headlights just stopped working. My lights turn off automatically when I turn the car off so I always leave the headlight switch on. I noticed this weekend that my low beam lights were out. My parking lights & fog lights both work and I can put my headlights on high
|
| Suspect MAF Sensor problems / stalling, hesitation etc? TRY THIS FIRST! (Gen4) | 25 Aug 2005 05:55 GMT | 6 |
Hi All, I posted a previous thread about my stalling / hesitation problem with a Gen4 MAF sensor. I found out that the problem would temporarly go away if I
|
| 97 Maxima clock and radio question | 25 Aug 2005 02:58 GMT | 1 |
Is it normal for the clock above the radio to go out. Mine quit some time ago. I am thinking of replacing it. Also the LCD on the radio is illegible. I don;t know if it got too cold or what. Thanks for your comments or thoughts.
|
| 96 nissan maxima | 24 Aug 2005 18:17 GMT | 1 |
What does a knock censor, and a idle censor do or don't do. Mine has gone out and really need to know what these do for my car.
|
| regular tapping metallic sound when clutch is not pressed | 24 Aug 2005 08:13 GMT | 4 |
Hi. I have a 96 Maxima SE with 136k miles. Starting at about 134k miles, I started noticing a regular tapping metallic sound when the clutch is not pressed down (foot not on clutch pedal). I do not hear this sound when pressing down on the clutch. When the clutch is not
|
| Auto trans removal | 24 Aug 2005 08:11 GMT | 5 |
Can anyone give me a good step by step on how to remove the automatic transmission on a 93 Nissan Maxima? Thanks
|