I think its the altenator. I put a new battery in it, I ran it 62 miles
with the gauge showing that the altenator was charging. Its normal voltage
is 12-14 volts. Now when I start it or jump it, after it starts, the
'volts' gauge shows the altenator to be not charging. I rev the ...

 I have had the emissions codes P0440 and P0446 since I was given the car by
my mother.  I took it to two diffrerent shops which just turned the ligth off
and said don't worry about it.  Then two days ago the engine light started to
flash with a hard idle.  It was explained as ...

Just had the immobilizer module replaced in my 2000 Maxima as the car
wouldn't start.  Of course, they gave me a new key.
My service manual says that the module will accept programming for up
to 5 keys.  Does that mean that my original key can be programmed to

I lost my keys yesterday. I got my spare and had copies made.  Here is
the problem ...It looks like my last spare is one of those red head
valet keys !  So now the copies dont open the trunk.(the interior trunk
reale is also broken)  I called a lock smith and he said if I had the

Can anyone tell me the format used by Nissan for their 1999 A32 Nissan
Maxima's please?
Was it:
9AA+AA99999

OK...So I ran out of gas. It happens. I put more gas in and it won't start.
Did I fry my fuel pump? How can I tell? If it is a matter of priming the
injectors, what is the best way to go about doing it? Or, any sound words
of wisdom pertaining to how not to see how far you can push ...

i have a 99 maxima that has a misfire at idle. i changed out the plugs
and all were looking good. also checked all the coils and they all have
a proper reading. there were no codes in the ECM...any thoughts on what
could be causing this misfire at idle...kinda odd that the ECM would

Help!
The other day, I played a CD-R in my Maxima's CD player.  At one point,
the disc froze up and the display showed "ERROR".  I ejected it and
inserted another CD (a commercial one which had previously played

Interested in changing to smaller profile tires from the original factory
size (same wheel size), wondering if there are any DIY (ie - simple) kits
out there to recalibrate / adjust the speedometer on my '97 SE with the
analog gauges.  One speedo shop I checked with wanted $400+ ...

was trying to do my premier brake job - I was trying to remove the
caliper bolts, and lo and behold, I ended up breaking them....... they
were really tight and I found myself using a lot of force to loosen
them...in the end, I probably snapped them off...

Hi all. First of all, thank you to the participating experts in this
group. You all really helped MadNeighbors with his stalling.
I have a problem that is very similar, but I want to avoid the expense
he went through if at all possible :)