Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Nissan / Nissan Maxima / December 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
87 maxima 20 Dec 2005 16:35 GMT3
last week I was on my way home from work, the car was running great. I was
at a stop sign, When I hit the gas the car sputtered and would not go over
35mph. I made it about three miles after that and the car quit. It is
getting fire but it would not restart. I got the car towed home ...
Tires18 Dec 2005 04:20 GMT2
How many miles should I expect from my Bridgestone Potenza's. I have 59000,
maybe 70000 miles.
2003 Switches and such16 Dec 2005 19:07 GMT5
Are 2003 Maximas prone to bad switches?  I have had mine for about a
week (bought it used with 122K kms) and have discovered the following:
1.  Passenger window switch (on driver's) will lower passenger window,
but not raise it, have to use passenger side.
rear brakes15 Dec 2005 07:44 GMT5
I have been trying to replace rear brake pads on this 1989 nissan maxima;
unlike the front callipers I am having trouble getting the rear piston to
retract.  I believe it is a ABS system  . . . any suggestions?
maxima transmission no reverse 9015 Dec 2005 02:03 GMT1
My 90 SE has no reverse,  I'm assuming the tranny is bad.  Any ideas on
buying a rebuilt or used tranny.  I'm in minnesota.  Thanks
Blower motor fan blade rubbing - noise14 Dec 2005 13:35 GMT3
My 2002 Maxima blower fan blade is rubbing against the plenum housing,
worse/loud scraping noise when it is at low speed. Anyone has an R&R
procedure for getting to it? It is so loud now as the weather just got
colder and I cannot leave it on even at the highest speed setting. If I
Hot dang, 96 gxe hits 200k!13 Dec 2005 03:56 GMT3
just thought i'd share the info, pics:
http://paducci.textamerica.com/?r=3827138
for a better pic:
http://tinyurl.com/7ol2n
Grinding noise at startup -- Solution13 Dec 2005 02:29 GMT2
Several months ago I posted a question about the grinding noise that
was happening a for a few seconds after starting my engine.  Nirav
replied that it was probably the starter and that this is a common
problem for the Max.  By gum, he was right -- thanks!
Running hot or is it? 11 Dec 2005 15:53 GMT3
 I have a 1990 Maxima and usually the temp indicator needle stays halfway
but for the last couple of days the needle moves over towards the hot area
about 3/4 ways past cool after being driven for awhile. Sometimes it goes
back to halfway but mostly it stays on the 3/4 mark. I did ...
95 maxima no heat10 Dec 2005 07:36 GMT4
The blower blowing cold air when sit idle, but when you give more rpm then
it start blowing hot.
Is it the thermostat or the water pump going bad.
Any body can help.
1992 transmission and....09 Dec 2005 23:52 GMT2
Tranny has up and left on my 1992 Maxima.  I have had a hard time
locating a replacement, but have found one via www.jkjapaneseengine.com.
 Just wondering if anybody has had any experience with this company, as
they want cash up front and refused visa.  Price quoted seems okay,
99' maxima alarm issue09 Dec 2005 22:19 GMT5
Please help!
I can lock and unlock my doors and then when I put the key in ignition, it
cranks but won't turn over.  After opening the doors the security light
blinks and when I try to start the light stays on constant.  
Newly acquired 200309 Dec 2005 14:41 GMT3
Just picked up a 2003 GLE with 122500 KM on it and just got back from my
first "driving in the snow" experience.  The TCS on that thing is amazing!!
I blew past these guys on a slight uphill, the first a Z28 (no surprise!!)
was just slippin' and slidin' on his fat tires; the other ...
wiper blades07 Dec 2005 02:20 GMT6
does anyone have a report on silicone wiper blades. Are they
any good???
--
boots
Hard start, fuel leaking06 Dec 2005 21:20 GMT1
My 1987 Nissan Maxima leaks fuel from the Pressure regulator control
solenoid valve for 15-20 seconds after starting. Idle is very rough and
has very poor fuel economy. Is the problem the fuel pressure regulator?
Pages: 1 2 3 November, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.