Recently my '01 Maxima's garage door opener button quit working.  When I
push the button the trunk open warning light and the door ajar warning
light on the instrument panel come on but my garage door does not open.
At the same time my keyless remote quit working. Also the trunk ...

For the longest time the automatic climate control on my 2000 GLE
wouldn't work as far as heat was concerned: it would only blow heat when
I would set it at 80 or so (in which case the car would get way too
hot!)

Anyone get their Xenon headlights ripped off in NJ? If so, you may be
able to claim some cash...
http://www.nj.com/news/ledger/jersey/index.ssf?/base/news-2/113773632...
Maxima owners to get piece of $325,000 for headlight thefts

My 95 SE won't start, I just get tic tic tic when I turn the key. I've
been having starting issues lately, I had to turn the key several times
from the off to the start position before it would engage. This sounded
like a switch problem that was mentioned in the group, but the ...

begin 644 superbe ! obtenez beaucoup d'argent rapidement avec paypal ! C'est totalement legal.txt
`
end

1999 Nissan Maxima "Service Engine Soon" diagnostic code reported that
the O2 (Oxygen Sensor) on Bank 1" was in alarm. Online research for
Nissan parts suggested that my car may have 3 oxygen sensors (front,
center, & rear).

I have a 97 Maxima, standard A/C NOT climate control! When the buttons are
pressed to control air direction, they do not work. Air is routed thru the
dash vents and the floor vents only, no matter what button is selected.
I need to know if this is a vaccum or electrical control ...

I finally got my car home! I got the car running. The only way I can get my
car to start is to pour some gas in the air intake and the car will start.
If I don't pour gas into the intake it will not start. It will not start
with mass air flow sensor plugged up. ($170.00 part) The ...

How hard is it to remove and replace front brake rotors on an '01 Maxima.
I removed the caliper several months ago to check the pads but did not
look to see how to remove the rotor. Now the rotors need to be
turned/replaced.  I want to know if I do it myself.  Same question for

I have a 1999 Nissan Maxima that report a knock sensor error code on
bank 1. My mechanic says it should be replace and it could cost about
$500 for parts and labor total. Knock sensor cost about $160 from
Nissan.  How hard is it to replace on my own? Do I need a mechanic or

I was lookin' thru my records for my 95Max - and it seems - that I
have never had the transmission fluid replaced in all those years. So,
I started to read up on the topic and saw many allusions to a "power
flush" by several names and wondered if it was a worthwhile operation?

Now that I've got my timing belt and water pump replaced, along with the
other things in that region...  I'm wondering what else I can do to
extend the life of my 93GXE.
It's at 130K and I'd like to take it to twice that many miles.

at what time do you think it would be appropriate to replace my 1995 water
pump, have I been lucky so fare, or am I worrying for nothing?
if you have a 4th gen, at how many miles did yours go, or when did you
replace it?

I would like to know how good or bad this truck is,
It's a Nissan Frontier XE I believe, the plain jane flat bed, no thrills
two door, Year 2000, 180,00 MILES, (YES, 180,000) AC, 4 cylinder,
automatic, one owner, highway miles, well maintained. drives and feels

Trying to change timing belt on my 93 Maxima, trying to get the
crankshaft pulley off.  Before I go wrenching on the center bolt, is
this a reverse-thread or normal bolt?  If memory serves, and if I'm
thinking right, it's reverse.  Am I correct?