Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Nissan / Nissan Maxima / June 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
96 Maxima towed with parking brakes on30 Jun 2006 09:42 GMT3
My Maxima was towed for about 700 miles and all this time the parking
brakes were engaged.
It was being towed on a dolly with the front wheels off the ground; the
rear wheels were rolling.
car shakes when stopped30 Jun 2006 08:41 GMT9
i have a 95 maxima.  it hadn't been driven in about 4 months (i was
gone) and in the last month i've put maybe 800-1000 miles on it?  when
i first got back, the car would shake when i was stopped in traffic
(especially on bridges).  it stopped doing that, but when I drove today
Oxygen sensor30 Jun 2006 05:22 GMT7
My 2000 Max check engine lite came on, and the scan tool says I need to
replace the rear O2 sensor. The TSB said something about re-programming
the ECU when the O2 is replaced. Can someone shed some light here on why I
cannot just put a new Nissan O2 and leave the ECU as is, so I ...
EGR Valve29 Jun 2006 07:42 GMT6
The check engine light came on and the code advise a problem with my
EGR valve. I replaced the valve, but the check engine light won't
reset. Any ideas
Brakes28 Jun 2006 23:50 GMT4
I have an 02 maxima and wanted to get the brakes done, so I purchased wagner
thermo quiet pads.  Is this a good brand to get.
1993 Maxima cuts out26 Jun 2006 08:37 GMT3
Whenever I drive my car, it drives fine.  However, sometimes it cuts out
whenenever the car comes to a stop.  I will try starting it about two or
times before it starts again.  I tried many mechanics and all they do is
fix something else and the problem still remains.
REmote25 Jun 2006 08:04 GMT3
I have a 2000 Maxima GLE and the range of the remote is getting very short -
sometimes it barely works standing right next to the car. Yes, I have
replaced the battery in the remote (twice). Any ideas would be appreciated,
thanks.
6th gen question24 Jun 2006 18:25 GMT2
Is there a difference in the suspension and performance characteristics
between the 04,05 & 06 SE vs. the SL??
Chris
90 & 94 GXE's
Manual transmission, differential bearings in 5th gen?23 Jun 2006 08:08 GMT1
Has the differential bearings problem in 5spd trannies been resolved in
5th generation
Maximas?
90 GXE head project23 Jun 2006 08:03 GMT1
I am going to tackle a big project.  I have a badly-leaking rear exhaust
manifold, broken studs, etc.  I have decided to bite the bullet, remove
the heads and replace all of the studs.  I just can't imagine that I
could do it with the heads still on.  The car and engine have ...
93 GXE drivebelt replacement23 Jun 2006 07:25 GMT4
93 GXE auto, 175k
Car is due for regular maintenance at 180k. Drivebelt was last
replaced at 120k. Some folks say the drivebelt should be replaced
every 60k, but I have heard others say they are now capable of lasting
Still another SES question - 02 SE22 Jun 2006 12:43 GMT6
The SES light came on yesterday in my 02 SE with less than 40K miles.
Never had any service problems with this car and dealer performed full
30K service a couple months ago. Is there any way to get the codes
without buying a scan tool? Is there any way to reset it to see if it
Dunlop Tire Question22 Jun 2006 03:14 GMT5
Anyone have a report on the Dunlop Tire? I am in the need of
tires for my wife's 2000 Max. We live in Northern Wi. and
will be driving in rain and snow. Thanks
--
MoonRoof 97 Maxima20 Jun 2006 17:43 GMT5
Well, last night the moonroof would not come in, easily.  When I push
the button to have it slide back into the closed position only one side
would move.  It appeared that one side of the glass was binding up.  I
was able to pull that side while pressing the button to have the ...
R&R Motor Mounts on 9618 Jun 2006 16:08 GMT2
Anyone here ever replace motor mounts on a 96?  Looks like there are 4 of
them and was wondering if this was a BIG job or easy.  Thanks...
Pages: 1 2 3 May, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.