| Thread | Last Post | Replies |
|
| 350z VIN definition? | 31 Dec 2003 21:08 GMT | 4 |
Does anyone know the breakdown of the VIN numbers for the 350z and what they apply to? examples: JN1AZ34E73T117071
|
| ARP Head bolts for VG30ET | 31 Dec 2003 03:07 GMT | 1 |
I helping a friend rebuild his 84 Z31. He wants to use ARP head bolts, but ARP does not make that set. I found the ARP Part numbers for the Z32 Head bolts, but they are not the same as the Z31. Does anyone know the ARP part numbers or at least the sizes of the bolts?
|
| 1982 280z GL FS | 30 Dec 2003 15:34 GMT | 1 |
No more time for project. Going back to school. '82 280z GL with L28 motor. I actually have another engine and all the parts from a second '81 280z. You can have any of the parts you want from the second car. Both cars have almost new clutch. One new alternator. new belts, hoses, ...
|
| 260Z Power steering ? | 30 Dec 2003 13:52 GMT | 7 |
Is it possible ( feasible ) to put power steering on a 260Z ( Australian spec ) ? I 'm really looking for a nice Z ( ZX ) classic, but want to be able to drive it everyday...and I live in a "no through road" ...which mean 3 point
|
| 350Z ProCharger Super Charger 400+HP and UZ Tune Pak | 27 Dec 2003 18:29 GMT | 5 |
Has ANYONE used this or seen it? This seems to be the best thing out for the 350Z PLEASE any input would be greatly welcomed!!!!
|
| 350Z Owners - Do You Think The Ride Is Too Harsh? | 26 Dec 2003 13:26 GMT | 13 |
Hi Y'all, I have had my 350Z for about a year, and truly love everything about this car - except one. I feel that the ride is just too harsh. I constantly feel every little bump and pebble in the road, and when I drive over train
|
| 350z Wheels/tires on 91 300zx = rough ride? | 22 Dec 2003 06:33 GMT | 2 |
Does anyone have stock 350Z wheels/tires on a 300zx? If so, has your ride suffered greatly? Brent
|
| '87 300zx oil pressure unit | 21 Dec 2003 14:23 GMT | 4 |
Go to replace this unit and find that a 13mm is too small, so I use the 14 on it and round the fitting off(damaged the corners anyway). Try to go at it from the other side by taking the oil filter off (they are side by side, the filter nearer the front). Had no luck either. Decided ...
|
| 87 300zx Heater Core replacement | 11 Dec 2003 04:52 GMT | 1 |
Any suggestions on how to replace a heater core in 87 300zx? Also are there any sites besides z31.com that I can find directions on replacing heater core? If anyone can help thanks
|
| 78 280z with fast idle | 10 Dec 2003 07:22 GMT | 5 |
I recently failed emisions and had some adjustments made on my engine (L28 efi) and now when ever i stop or slow down the idle stays at about 2 and a half grand and the only way to get it to idle normaly once im stopped is to tap the acelerator pedal. any help would be
|
| 88 300ZXTurbo surging when cold | 10 Dec 2003 02:17 GMT | 8 |
I have a 1988 300 ZX Turbo that seems to have quite a low growl in the morning along with a surge of power and then no power repeatedly until the temp warms up to beyond the second bar (electronic dash). Also, sometimes it seems to run very well and other times it seems to surge a ...
|
| 300Z TT power transistor unit failed | 07 Dec 2003 09:16 GMT | 6 |
My 300Z TT recently had a dramatic failure of its power transistor unit. I've been told that repair of this "defect" is reimbursable through Nissan. Do you know if there's any truth to it? Please suggest how (& to whom) I apply for this?
|
| 77 280z broke down on the road today. Air flow? | 03 Dec 2003 03:02 GMT | 8 |
It started fine, but was running kind of rough, idling slower than normal. I thought it was just cold, sometimes it needs to be warmed up. I let it go a minute or so, then started out. It ran okay, occasionally getting kind of ragged, though, behaving
|
| FA: Chilton's Datsun/Nissan 280Z and ZX 1970 to 1988 manual | 02 Dec 2003 22:22 GMT | 4 |
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=34229&ite m=2437193186 If there are no bids, I will send it to any of you guys/girls for the price of shipping. Otherwise it will be recycled.
|