| Thread | Last Post | Replies |
|
| Help! Low Beams and dash lights are out! | 29 Apr 2004 14:26 GMT | 2 |
Well of all things... I was in the car lot at my local Nissan dealer and dammit if I was drooling over a new 350Z (while in my '92 300ZX TT) I het the speed bump REALLY HARD. Now I notice that I only have high beams. No low beams... no dash/instrument lights. I tried
|
| 94 Nissan 300zx For Sale in Tampa | 29 Apr 2004 02:15 GMT | 2 |
http://www.fflheadquarters.com/z/300zx.html - Richard Fleming
|
| 240z dash bulbs | 28 Apr 2004 02:35 GMT | 1 |
Looking for advice on how to replace some of the bulbs on the back of the speedometer head on a 71 240z. I can get the lower wing nut out but i cannot get to the top on to pull the speedometer out. The local Z shop wants $100+ to replace 3 bulbs on it. Would it make it any
|
| Injectors on 300 ZX | 26 Apr 2004 00:50 GMT | 1 |
Can anyone advise me on the correct method of removing old injectors from the injector rail and whether the plastic top and plastic nip on injector is critical to the operation of the injector? This is for a 1990 ZX N/A. Thanks
|
| ZX cigarette lighter ?? | 23 Apr 2004 06:14 GMT | 3 |
Need some info on the 280ZX ( '83 2+2 ) cigarette lighter ! Firstly...is it green ( I've seen some in pics like this ) or black...also seen these too ? Does the original lighter illuminate when the dash lights are turned on ?
|
| '84 300ZX Parts | 20 Apr 2004 15:23 GMT | 1 |
Anyone know where to get aftermarket parts for a 1984 300ZX? I am looking for interior items such as dashboard, guages, covers, etc.
|
| 1985 300zx | 19 Apr 2004 08:01 GMT | 1 |
A couple years ago I picked up an 1985 300zx as a play car, but found out that it probably needed a timing belt change and other maintenance. My wrench-turning knuckle-banging days have passed, so it has been rarely driven for fear of engine destruction (oh, and my
|
| Power steering fluid and cooling 300ZX TT | 17 Apr 2004 16:50 GMT | 1 |
I wonder if there is any cooling of the power steering fluid on a 300ZX TT european mod.? Behind the radiator I can see the oil cooler, but just behind the oil cooler there is also a cooler...the cross section of this cooler is about 3cm x 3cm...What kind of cooler is this?? The one ...
|
| Nissan ConZult | 14 Apr 2004 04:57 GMT | 3 |
Does anyone on here have one of these? Rick
|
| Looking for a Z car ... | 12 Apr 2004 05:09 GMT | 10 |
Looking to buy a 92/95 Z car. Let me know if you have one for sale. I am in the Virginia Beach, VA area. Willing to travel a little, let's say 400 miles .... Thanks in advance
|
| Early Z starting procedures | 12 Apr 2004 04:46 GMT | 1 |
In the manual for my 70 240z, it says to not depress or pump the accelorator pedal when starting when starting cold or warm, that the SU carbs are preset to assure correct mixture. In the manual for my 74 260z, for warm starting it says to depress
|
| replacing detonation sensor on '90 300ZX | 11 Apr 2004 03:18 GMT | 1 |
Anybody have any advice about replacing the sensor on my Z? I understand there is a way to do it without dismantling the top end of the engine???? Thanks, Damon
|
| Procharger for 350ZR | 10 Apr 2004 16:15 GMT | 16 |
I am considering purchasing a procharger for my 350ZR. I was told that at 11psi, the crank horsepower is increased to approximately 500. The procharger is a completely self contained unit with its own oil reservoir. I have heard recently that some Z's have blown the engine with this ...
|
| what to look for on an 80 z... | 06 Apr 2004 22:21 GMT | 4 |
hey guys, i am totally new to the Z cars (i have pretty much just stuck with older GM cars untill now) i don't really know a lot about the Z's but i have the oppertunity to get one.... so i was wondering if there were any problematic areas that i should look at. i just don't want ...
|
| 350 tires | 04 Apr 2004 23:11 GMT | 10 |
The Nissan dealers in western Canada are covering worn out front tires on all 350's that are still under warranty. The problem is the geometry, under braking the wheels toe in a little, under acceleration they toe out a bit. No alignment will fix this problem completely, the ...
|