Hello from New Zealand!
I have a Japanese import Terrano 3.0 Litre V6 petrol. Recently the left hand
headlight was sluggish in changing from high to low beam. Didn't worry about
it as both were working on high beam, and the right hand one changed

Okay so I have already switched over to synthetic for the engine.
What are the general opinions on changing the ATF and final drive to
synthetic on a daily driver in SoCal ?
Thanks.

Parents just bought it for me. I added LED flashers, neon runners, and beati
stereo.
I hate the colour. It is black. I figured I would add some flare to it, so I
made a stencil of fire, and lips, and taped to car sides. Then I spray

I just went through one of the most frustrating experiences in my life, for
a simple headlight change.  It resulted in numerous cuts on my hand and one
2nd degree burn in the palm of my hand.
There must be an EASIER way to change out the low beams (9003) on a 1995

I honestly don't see as satisfied with any other car... roomy,
powerful, good looking, smooth... I don't know what I will replace it
with when the moment comes... with a '04 Maxima perhaps? ;)
Just felt like posting this, sorry...

I'm having trouble with what I presume is the clutch.  My friend looked at
the clutch and said that the disc needs to be replaced.  Is that the only
thing that I need to replace or should something else be replaced with it?
When i'm getting onto the highway and need to get up to ...

This weekend I'm planning to replace my wife's (98 Quest) van front disc pads.  I have read several
articles on the subject and feel confident.  I have the tools needed but have a question.
The van has ABS, are there any precations when servicing the brakes on a car with ABS?  I'm ...

Can anyone suggest a good steering lock for a 1993 1l Nissan Micra (or else
tell me which ones to avoid). We have a problem with car theft in our area.
One of those which cover the wheel might be best since they are so visible
from outside and may prevent a break-in.

I just purchased a used Pathfinder with a Navigation System. I did not
realize that the dealer did not provide the Map CDs. Is there anyplace
where I can obtain them other than the ZENRIN website?
Also, the car had a VCR system installed. Does anyone know if / where

Hope someone here can give me suggestions.
My 2000 Frontier is noisy between 1000 and 1200 rpm.  Passengers tell
me it sounds like there's a hole in the muffler, but I feel like it's
high frequency vibration.  What's really odd is that at idle (750 rpm)

Are there really any differences in modern lubricating oils?
I mean, as long as you use the proper weight of oil and it is of good
quality, are there any real differences?  Aside from the advertising hype,
take for example, my neighbor has a big John Deere tractor that costs over

I have a new Sentra Spec V with only a few hundred miles on it.  When
should I do my first oil change.  I'm thinking of changing it around
1200 miles, when the break-in period is done.  Just to be safe and get
any debris out of there, thinking that more debris may be present

My 1993 Nissan makes a strange, random chirping sound when idling. I have
changed all of the belts so I know this is not the problem. The engine runs
fine and I've got 97k miles on it. Any suggestions?
Thanks.

Engine started idling real low at stops. When in park it idles fine (about 1000 RPM) but when I put it in gear it drops down to less than 500 RPM. I adjusted the idle while it was in gear to get it to idle at close to 1000 RPM. But that puts it at close to 2000 RPM when in park. ...

Does anyone know which programming language has been used to make the
onboard computers on the nissan Primera (2003 model), the one with camera in
the back..
i'm not satisfied with the information and abillities of the program and