| Thread | Last Post | Replies |
|
| 1990 300zx, 99k miles ALL original parts perfect running cond. for sale. | 23 May 2004 05:11 GMT | 2 |
gar. kept red 1990 t-top with 99k800mi. in excellent condition and PERFECT running cond., service manual included, new tires, recently inspected. will take best offer. located in southeast. va.
|
| Pathfinder - Intake Sensor Mod?? | 23 May 2004 02:15 GMT | 8 |
Just wondering if these "Intake Sensor mods: you find around Ebay really do work? Here's an example of one that's listed right now: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2452335449&category=40926 From the picture, it doesn't look like anything more than a resistor
|
| Frontier Crew cab Mission acomplished | 22 May 2004 02:15 GMT | 2 |
Group, First I like to thank everybody for their input. I did finally purchase a 2002 Frontier crew cab S/C. I found the car on traderonline and it wasn't advertised as a supercharged, so
|
| Transmission oil filter and oil change | 21 May 2004 21:12 GMT | 4 |
I just came back from the garage and the guy told me I should probably change the transmission oil filter and transmission oil after 50K. I have a 1997 quest and I see that the previous owner did it after 36K. It's now 130K. Should I change it again. Does it really matters?
|
| Nissan sentra or Toyota Corolla- Which one to buy? | 21 May 2004 07:33 GMT | 4 |
I am looking forward to buy a small car for my family(me,wife and a 4 yr kid). I am considering 2004 Nissan Sentra S or 2005 Toyota Corolla S. I want as many opinions as possible to take an informed decision.
|
| Sentra SE-R spec V LOGO(MARK).... | 21 May 2004 03:13 GMT | 2 |
I just bought used SE-R spec V and it doesn't have any logos(marks)... Does anyone know how can I get it? Thank you. Hide
|
| Oil filter hard to get to. | 21 May 2004 02:17 GMT | 5 |
Any tricks to getting to the oil filter on a 1998 Frontier. Besides going through the sidewall? Perry
|
| Still looking 01 or newer crew cab long bed needed | 20 May 2004 22:20 GMT | 8 |
I spent just about all day test driving Frontier crew cabs. The cheapest but newest was a brand new 2004 crew cab, short bed, 5-speed 7 miles on the odometer,10 after I finished driving it, I can have it for $ 16,190.
|
| 1999 pathfinder Gas Pedal sticks 681 | 20 May 2004 16:49 GMT | 6 |
Does anyone have this problem. I have found a few on the net with this problem. I was told by nissan that they issued a service bulliten in 2001 about this problem and how to fix it to there service people. I have fought both nissan corp and my dealership to no avail. It is my ...
|
| 2001 or newer Frontier Crew Cab ?? | 19 May 2004 11:12 GMT | 2 |
Group, I'm in search of a slightly used Frontier Crew cab. I've looked on e-bay motors and in the traderonline.com. I own a Mercedes shop myself but I like to get a small pick up for the "honey
|
| removing dashboard to access lightbulb in 1992 Sentra | 19 May 2004 02:39 GMT | 3 |
can someone explain to me how to change the left lightbulb behind the dashbord? We were able to remove several covers from the dashboard but are unable to detach the last one which is right over the speedometer and odometer. It's very thin plastic, I am afraid to break it and it
|
| Nissian Quest rear drum brake question | 19 May 2004 02:06 GMT | 2 |
Hey guys. I am replacing the rear drum brakes on my quest. In my repair book, it tells me to adjust the star adjuster until the brakes drag on the drum a bit when it's turned, and then move the star out again so that the drum turns freely. Is that right? Why adjust the brakes out, ...
|
| Need: 79-83 280ZX tail light bulb socket | 19 May 2004 01:47 GMT | 1 |
Does anyone have (or know where I can find...) a stop/tail light bulb socket for a 1979 280ZX? This is the black plastic socket with three wires--black, green/wht and green/yel--that holds one of the four rear stop/tail lights. A
|
| Rebuilding calpers, how do you the dust seal into the caliper (Nissan) | 18 May 2004 13:07 GMT | 4 |
I'm trying to rebuild the front calipers on my '88 Nissan 300ZX (two piston). Damned if I can figure out how to get the piston back in with the dust seal. Is there a trick to this? I tried putting the seal in first and putting the seal on the piston first. Nothing seems to work.
|
| Primera wiper trouble | 18 May 2004 11:08 GMT | 5 |
I have a 1996 UK Primera GX and the single wipe / intermittent wipe has failed, though I retain normal and fast wipe. Is there a relay / timer for this somewhere? the pitiful Haynes manual tells me absolutely nothing and I'm at a bit of a loss as to where to
|