| Thread | Last Post | Replies |
|
| Charging AC on an '82 280ZX | 07 Jul 2004 03:07 GMT | 5 |
Working on AC components always gets me nervious. Can someone please confirm for me where the low pressure valve is on my '82 280ZX so I can charge my AC? Thanks!
|
| Maxima Back Lights | 06 Jul 2004 16:08 GMT | 1 |
Do anyone know off a good place to buy Carbon Fiber Lights for 1995 Maxima. Thank
|
| 95 Nissan Altima wants to stall when a/c is on & rough idle & engine light | 05 Jul 2004 22:13 GMT | 5 |
I have a 95 Altima, it was hesitating on take off and sometimes while driving. Putting on the a/c caused car to almost stall even while driving. I had a friend whose a mechanic do a tune up last week. Car was running awesome, no more hesitation, ran fine with a/c on, engine light
|
| 95 pathfinder spare tire mount kit? | 04 Jul 2004 20:56 GMT | 9 |
Does anyone know the best place to find a kit so that I can mount the spare on the back of the truck instead of the inside?
|
| My car idles high and accelerates by itself! HELP! | 04 Jul 2004 09:23 GMT | 7 |
(Forgive the Honda cross-post, but you guys seem to know a lot... I own a Honda too!) My mechanic completely screwed up my car (95 Nissan 200SX SE-R with the SR20DE engine), and I was hoping someone out there might know how, since he
|
| How to start a car without starter. Is it possible to do? | 04 Jul 2004 07:21 GMT | 7 |
How to start a car without starter. Is it possible to do? Expert will say, probably, yes! Just insert the key, turn the transmission on and push the car. I thought so until recently when starter was broken. In my experience it worked OK with old cars (60-70th), but with automatic
|
| "Novel" idea for removing rear brake drum? | 04 Jul 2004 07:19 GMT | 8 |
I have an 86 Sentra. I can't remove the rear drums. Apparently, Honda has a threaded hole in their drums into which one is supposed to screw a bolt which pushes against whatever holds the stub shaft which the bearings
|
| Valve cover gasket + spark plug seal | 03 Jul 2004 12:38 GMT | 4 |
1998 Altima GL 2.4L engine. I was going to change the plugs today for this car and on the first two cables to the left were soaking in oil. At first I panicked and thought that it might be a head gasket but about 30 seconds later I figured that it was
|
| Hesitation/cutting out at speed when engine is warm .. help! | 03 Jul 2004 02:52 GMT | 14 |
I have a 93 Mercury villager. (Aka Nissan Quest). I've had the van a short time, and pumped some cash into a new timing belt, etc. She starts, and seems to run fine. But today, when coming back from getting new tires. She seemed to be starved for gas. Around 35-50 miles an hour. You ...
|
| 1995 200SX AC/Cruise Control/Idle Problems | 02 Jul 2004 21:40 GMT | 3 |
Where will I be the next time I can't keep my 200 started? Probably a lot of dumb questions here, but I fix people, not cars for a living. I just bought this car a year ago, had it checked by 2 mechanics,
|
| Question about 2000 frontier radio | 02 Jul 2004 16:24 GMT | 2 |
In my 2000 frontier 4x4 KC, I've got a cassette player but want a cd reciever and some better than factory speakers. When I look at my local circuit city, online thru crutchfield, all they have listed for speakers are the two 6 1/2 speakers in the doors and never mention
|
| Spare Key - NATS | 02 Jul 2004 14:31 GMT | 8 |
I have a Micra fitted with the NATS security system. I the master key and went to ask about a spare key but was told it would cost GBP65.00. Is this the usual cost? If it is what justifies this level of charge? I have a motor cycle fitted with a similar system and to programme ...
|
| help my breaks sqeak!!!! | 02 Jul 2004 14:21 GMT | 10 |
Hi I have a Nissan Sentra GXE 1997 and I installed new disk and new brake pads. The car was okay for about two months but then they started to squeak when I went in reverse then it does it when i aplly the brak at any time. I put the grase and it doesn't work. Please
|
| Nissan Forum | 02 Jul 2004 14:09 GMT | 4 |
Sorry for this post, But, I've put up a forum specifically for Nissans, and soon to follow will be a website to run along side it. please visit
|
| Help: Carb bolts on '86 pickup | 02 Jul 2004 01:12 GMT | 3 |
Anyone know what type of wrench to use to remove the nuts on the carburater on a 1986 Nissan pickup? They are real bastards. I am getting almost nowhere. One side isnt too bad, but the drivers side, I cant even loosen them. Looks like
|