My rear window will squash images in part of it like it is warped.  If you
sit in the driver seat and move slightly up or down while looking in the
rear view mirror you can see the area of the window that crushes and expands
images like a fun mirror.  Is this normal or should I ...

Looking for hats, shirts etc that have the Nissan logo. Can anybody point me
in thre right direction? Thank you in advance.

Do the Frontiers have chains or belt? How about the car models?
AHFI
DON'T MOURN ME WHEN I DIE
I DIDN"T WANT TO BE HERE IN THE FIRST PLACE!

I own a '95 Nissan pickup truck that is perfect in ever way -- EXCEPT
that the frame has rusted through.   In essence, the truck is now
trash, despite having a great body, engine, and drivetrain.  (Three
shops have told me there's no way to weld or drill it -- the frame is

I purchased a Bosch universal O2 sensor because the OE one had melted.
After installing the replacement sensor the check engine light remains
on.  I was told by Nissan that I connected the wires incorrectly.  The
universal O2 sensor has 1 Black & 2 White wires.  The car has 1

I replace the fuel filter on my sentra by cutting the upper hose so I can
easily twist the filter out of the lower hose. I then replace the upper
hose (about 5 inches worth) with conventional SAE fuel/emission hose that
I get for a dollar. I always do it this way. The parts guy ...

Suspected a timing chain problem on my 1997 Nissan Sentra with 128K and a 1.6
engine as it was making a “clacking noise”.  Popped the valve cover and
discovered a lot of slack in the upper timing chain.  Gears, chain and cams
look very good.  Engine very clean and oil changed ...

The rotor under the distributor cap on my '97 sentra will not pull off. The
securing screw is removed, but this thing will not pull out. Do not want to
pry it with a screwdriver or plier. This could crack it or do other damage.
Anyone experience this problem and know any tricks?

I have a 94 Nissan Quest that started shifting rough and then started
making a lot of excessive noise when driven. I found that both the
left, front engine mount and the right, front transaxle mounts were
broken. I replaced both mounts and the rough shifting definitely

   I am attempting to replace the clutch in my 87 Nissan Pulsar (1.6L
SOHC). I have followed the steps in the Haynes manual, and am ready to ease
the transaxle away from the engine. I believe that I have removed all the
transaxle-to-engine bolts, as well as all the motor mount ...

Guys,
Can I replace the oxygen sensor on the I 30 myself or do I have to go &
see a dealer?
What do you guys recommend?

Should I go for a Tomtom unit or the Nissan OEM for a Primera ('03) SE, UK
Spec.  If you have you used both please comment and give an honest opinion
of which to go for.  Maybe there is a better one on the market?

I just help my cousin program a remote to replace a broken keyless
remote transmitter for his '93 Pathfinder.
EASY.  Save a bundle do it yourself
He got the transmitter at the dealer.

Have a 2002 Sentra with automatic transmission and 35000 miles.
Starting several months ago I would go to start the car but when I put
the key in the ignition and turned the engine would not turn over.  The
dash lights would not dim (indicating no load being placed on the

I have a 2006 X-Trail and wondered if it is possible for me (or Nissan)
to configure the car so that it locks the doors automatically above
10mph?? I know that one press of the keyfob unlocks just the driver's
door and a second press is required to unlock all doors - but it would