| Thread | Last Post | Replies |
|
| ECU 5v supply fluctuation | 30 Apr 2007 18:48 GMT | 4 |
What would you guys consider to be a normal fluctuation in the 5v supply to say a TPS? I read up to .5v variance at my TPS at idle, throttle closed -- this is in the supply voltage and, obviously, the TPS signal that the ECU reads.
|
| 93 Infiniti G20 Tach has twitch | 30 Apr 2007 18:44 GMT | 1 |
Hello group, MY tach will twitch and jump around , bearing no affect on the engine. Will even do it with IGN on and car not running. Sometimes will jump a little or bounce around like crazy any ideas?
|
| A great autosite takeauto.com | 30 Apr 2007 08:29 GMT | 1 |
www.takeauto.com The site provide lots of introduction for famious new autos. Auto prices,Auto feature etc. If you want to know much new cars, please to www.takeauto.com
|
| Hard starting after changing fuel hoses | 29 Apr 2007 21:37 GMT | 2 |
My 94 Altima had a small fuel leak at the rubber hose just before the fuel filter. I replaced the rubber hoses from the metal tube (from fuel pump) to the fuel filter and from the fuel filter to the injection tube. In this process, I had to move the vapor canister to
|
| 1993 Nissan Pickup D21 Won't Start! | 29 Apr 2007 19:21 GMT | 5 |
I have this truck as a daily driver (130,000 miles, 2-wheel drive, KA24E, 2.4 L) and just recently on my way home from work the rocker arms or lifters, I couldn't tell which, started knocking extremely loud when I was in fifth. I made it home and took a look at the truck
|
| engine swap Altima | 27 Apr 2007 15:17 GMT | 5 |
I have just bought a 1994 Altima. The odometer says 120,000 plus miles. The dealer told me they swapped in an engine with 67,000 miles. This car is a sweet runner and I like it........ my only question is how do I verify the engine change claim. Would there be matching
|
| What happened to the SkyWave? | 26 Apr 2007 16:51 GMT | 5 |
SkyWave 2879ABTC - RF Linear Amplifier STATUS - Discontinued April 2007 http://www.telstar-electronics.com/default_files/productsupport.htm lol lol lol lol lol lol lol lol lol lol lol lol
|
| reliable nissan mechanic in the san jose area | 25 Apr 2007 02:47 GMT | 1 |
all, any recommendations for reliable nissan mechanics in the SJ/south bay area? thx
|
| Help! hard start after changing fuel hose | 24 Apr 2007 15:36 GMT | 1 |
My 94 Altima had a small fuel leak at the robber hose just before the fuel filter. I replaced the robber hoses from the metal tub (from fuel pump) to the fuel filter and from the fuel filter to the injection tub. In this process, I had to move the vapor canister to
|
| Titan? | 24 Apr 2007 00:50 GMT | 1 |
Is there another group that discussed the Titan? I had a Frontier for years and got much information here. I have a new Titan and never see anything about them. Thanks.
|
| How do I find the right NG | 24 Apr 2007 00:43 GMT | 1 |
I hate to bt OT. How d I find the right group to post to if my topic of discussion is very general? Thanks for you help, Stephen Spankthebank
|
| CAN I DO IT MYSELF? | 23 Apr 2007 16:53 GMT | 1 |
I have a 2003 Nissan Micra I have been told by nissan that the reason my engine management light has come on is because of a faulty crank sensor. If I get hold of one of these myself, is it possible for me to fit it
|
| 1993 Nissan getting gas to the fuel rail but still won't start | 21 Apr 2007 13:30 GMT | 9 |
My mechanic friend and I are perplexed by this and just burned our afternoon playing around with the car trying to get it started. I pulled the car into a garage 8 months ago with a bad battery. When I pulled car in was just starting to overheat. I put a new
|
| MY03 Vs MY04 | 21 Apr 2007 05:27 GMT | 1 |
I'm hoping a bit of group wisdom mught be able to assist. I'm looking to by a 2003 or 2004 Pulsar Sedan. I understand that the model designation is N16 for these. They are often advertised as MY03 or MY04 - is that an engine code? In 2003 there seem to be both "N16
|
| 1986.5 VG60i Oxygen sensor location | 21 Apr 2007 03:41 GMT | 3 |
Can anyone describe for me, or better yet, point to an online schemata that indicates the location of the Oxygen sensor. The Haynes manual I have only narrates it as located on the exhaust
|