| Thread | Last Post | Replies |
|
| 96 Sentra Speedometer Wacked out | 30 Sep 2007 21:57 GMT | 2 |
The speedometr in my gf's 96 Sentra GXE is starting to flake out. It often drops to zero for a few minutes, then starts working fine for a minute or so, then whacks out again. How can I fix it ?
|
| Transmission fluid/filter change | 30 Sep 2007 15:30 GMT | 9 |
I have a 2000 Nissan Altima. In the Haynes repair manual for the car it has the procedure to change the transmission fluid but doesn't mention a filter. Is there no filter to change? The car has 75K on it and as far as I know has never had the trans
|
| Nissan 2.4L Distributer Question. | 30 Sep 2007 01:07 GMT | 2 |
I gave my 97 Nissan PU, with 59,000 miles, a treat this morning. I replaced the original spark plug wires, distributer cap, and rotor with new items bought off the internet. The new wires were NGK (pretty blue color), and both the rotor and cap
|
| 95 Pathfinder Bose speaker dead - need a replacement | 29 Sep 2007 21:05 GMT | 3 |
I have the factory 8 speaker Bose system (with a different head unit). The front passenger door speaker (not the pillar tweeter) is "buzzing" - I figure it is blown. Anyone got a replacement? Thanks,
|
| Tires for 2005 XTerra | 28 Sep 2007 23:21 GMT | 3 |
My buddy is shopping for new tires for his 2005 XTerra, 6 cyl. M/T. He has 265/70 16R Long Trails on it now, which are about done. Located in rural Upstate NY, so snow/unplowed roads are likely. No real offroad driving is involved.
|
| 1986.5 D21 PickUp door lock linkage problem | 28 Sep 2007 22:22 GMT | 5 |
The driver door lock linkage on my 1986.5 D21 Pickup has disconnected. Although it is reasonably uncomplicated to get into the innards of the door, it is not clear how the linkage connects.
|
| Primera ABS Diagnostic Socket Location. | 28 Sep 2007 22:15 GMT | 2 |
Hello. I have a 1996 Primera 2.0 SE (PII I think) which has an intermittent ABS fault (the light comes on when driving sometimes). I have the fault codes for the ABS but don't know were the socket is located to initiate the self-diagnostic mode. I'm assuming it is NOT
|
| '01 Pathfinder overheat problem | 28 Sep 2007 02:23 GMT | 19 |
In May, my '01 Pathfinder overheated in VERY slow traffic towing my boat on a 71F day. I pulled off, kept topping up the overflow tank with water as it sucked it back in, and it got me 60 miles home. A week or two later I changed the
|
| 2004 Altima - winter rims | 27 Sep 2007 12:08 GMT | 1 |
I currently have 16" factory mags (205/65/16 all season) on my Altima and was wondering if anyone has downsized to 15" steel rims with winter tires (205/70/15)? Will 15" rims clear the brakes in the front?
|
| Replacement window seal - drivers passenger door | 25 Sep 2007 22:12 GMT | 2 |
I am having problem finding a company that will sell replacement seals for around the window in the passenger and drivers door. The dealership sells them in pieces, but the price is more that the total value of the truck.
|
| Versa, Schmersa | 25 Sep 2007 18:34 GMT | 1 |
Can't log in to Nissan.ca... So much for going to the website to participate in the "Win a Versa" contest.
|
| 03 SE-R spec V idle prob | 23 Sep 2007 19:30 GMT | 3 |
2003 SE-R spec V,71K miles,prev.owner put headers,exhaust,AEM cold air intake,I'm not sure if he discarded the catalytic,and there seems to be a O2 simulator wired in...there's a strange wire added to the front O2 sensor that goes inside the passenger compartment.(probably to the ...
|
| jack stands on altima | 23 Sep 2007 17:03 GMT | 2 |
Question from a guy just learning to work on his own car.... To jack up my altima I use the standard scissor type jack that came with the car. Now if I want to get under there to do some work what is the best place to put the jackstands. I would assume the jackstands
|
| exhaust pipe on 1984 Stanza | 22 Sep 2007 18:59 GMT | 4 |
In a couple of places, the pipe between the catalytic converter and the muffler has rusted out along the welded seam. Patching helps, but I guess I'll need to replace it one day. Many fasteners on the car can still be undone after 23 years. What
|
| Coolant heater install on 95 Pathfinder V6 | 22 Sep 2007 16:01 GMT | 3 |
Has anyone installed a coolant heater (tank style circulating) on a VG30e-equipped Pathfinder? If so, what wattage and how did you install it? Did the heater have a check-valve or not (ie Zerostart series 8000 or 5000)?
|