my friend has just bought a uk.v reg nissan micra 16 valve
inspriation.
he said they where using the car yesterday when the engine managment
light came on .they got up this morning and the car wont start ,it

I have followed this group from time to time for a couple of years and have
found good advice here. As I finally have a new server that allows me to
post, I can finally pose a question of my own.
My Frontier has the 2.4 L engine with auto trans and factory air. It has

U.S. auto industry closing great divide in quality, wages
http://www.washingtontimes.com/news/2008/nov/24/us-auto-industry-closing-great-d
ivide-in-quality-w/
U.S. auto industry closing great divide in quality, wages David M.
Dickson (Contact) U.S. automakers have made major progress ...

I am trying to change the water pump on my 99 Nissan Frontier 2WD 4
Cylinder. The water pump has completeyl failed.
I ahve the new water pump in hand but I can seem to get the pulley and
fan clutch assembly removed from the water pump so I can actually

Anyone out there knowhow to break into a 97 Nissan Pulsar?
The damned immobiliser locked the car up while keys were still in ignition
!!
Cheers

My '98 Nissan Quest was up for inspection, and a borrowed scan tool
showed 0325 (Knock Sensor) and 0400 (EGR Flow Error).  After the usual
drill where the local shop tried to convince me to pay $1000 to have
the knock sensor replaced, I did some more digging and figured out

I get a tapping noise that sounds like valves tapping. It last a couple
of minutes on the first start of the day.
Is that normal or might there be a problem? 2007 Altima 2.5 31k mi.

Well, I had the same exact problem. I had a small repair shop move in
next to my shop and ask the guy if he could check the codes on my car
for problems. He didn't have the cables for this one, but he said let
me take a look. About 5 minutes later, he ask me if I could smell

i tuned up my datsun 720 diesun and now i have traction i spin out
easy in gravel and on pavement anny ideas

Can anyone reccomend a good source for oem parts? I need some
maintenance items for my 97 Pathfinder. I think Courtesy Nissan in TX
gives discounts if you are a member of certain Nissan groups. Anyone
have good experiences with someone they can reccommend? Thanks

I am French, i bought a Nissan Prairie; that car may have different name
in different countries:
http://www.honestjohn.co.uk/carbycar/index.htm?md=284
1: i am looking for a French webforum where i can talk about parts, and

How do you read the oil pressure gauge on on 90 Nissan 300zx ?
 what is a good reading ?
  what is a low reading ?
  what is a not so good reading, and when should you read it ?