| Thread | Last Post | Replies |
|
| 1988 Delta 88 heater/air cond. vents very little output | 29 Feb 2004 03:22 GMT | 4 |
Hi, I bought a used 1988 Delta 88, and I can't get hardly any heat or A/C thru the vents. Even on the highest setting, air barely comes thru the vent. You have to put your hand about three inches away to feel the feeble output. It's also weak in defroster mode, but it seems a tad ...
|
| 1990 olds wont start | 27 Feb 2004 21:31 GMT | 1 |
olds wont start when cold. back fires through intake.starts for good if plugged in for 1 or 2 hours
|
| 1981 Omega Brougham | 26 Feb 2004 02:50 GMT | 1 |
I get vibration that seems to come from the left front. I've rotated and balanced the tires on schedule, and gotten the alignments--and in the past 4 years I've even replaced the front suspension, steering, tires, and engine and transmission mounts. Nothing matters. The recent tire ...
|
| Spam. Sort of. 68-70 parts need to go. | 24 Feb 2004 14:10 GMT | 2 |
Gang, I have some old (mostly) 68-70 Olds engine parts laying around that I'm ready to junk. Just wondering if anyone out here happens to be looking for anything before they get the heave-ho. I have a number of external engine parts from the 350 and 455. 350 mainfolds, quadrajet, ...
|
| Is an oldsmobile really where you wanna be? | 22 Feb 2004 20:24 GMT | 1 |
When you could be driving something better? CARE TO MAKE SOME HONEST MONEY? (SERIOULY) MAKE MONEY DOING NOTHING (INSTRUCTIONS BELOW)!!!!! : A little while back, I was browsing through newsgroups, just like you are now, and came across
|
| Olds 98 | 22 Feb 2004 05:03 GMT | 9 |
Recently I took a trip to a lower altitude and had some starting problems. The outside temp had fallen to below zero and the car would not start. After trying several times, I drained the battery and had to get a jump. Even with the Jump, it still took several tries. Once I got it ...
|
| Olds cuttlass ciara 91 3300 hot pipes | 21 Feb 2004 14:15 GMT | 1 |
eng. runs good at idle butruns ruff when pedle is applyed after 3 min. exshast pipes are red hot what can be at falt ...heads? timming? what?
|
| 87--98 won't spark. Why? | 18 Feb 2004 03:35 GMT | 3 |
Yesterday I was driving my 1987 Old 98 Regency Brougham around the block, only having started it two minutes earlier. All of a sudden it just quit running. I tried to restart, got good turnover, but no firing.
|
| service engine light | 17 Feb 2004 16:38 GMT | 1 |
I recently had my vehicle serviced and I also had the oil changed in it. I noticed the service engine soon light is on. Any ideas on what the problem might be?
|
| 2003 Alero Fuel Economy | 13 Feb 2004 23:50 GMT | 3 |
I have a 2003 Alero V6, with all the options and the handling package, and it's driven in the city, mostly. I'd like to hear from others what kind of fuel economy they are getting with this configuration. Thanks.
|
| Hood release latch in Cutlas Ciera 87 | 11 Feb 2004 19:12 GMT | 2 |
Dear recepients, Please help me with the following bizzare problem if you can: My hood release handle under the dash doesn't open the hood. Since my battery was died out, now I can not even start my car and I can not open the hood to replace the battery as well. Thank you so much,
|
| 1990 olds 88 wont start when cold | 11 Feb 2004 05:26 GMT | 1 |
1990 olds 88 wont start when below 0,had it on scope didnt show anything.If plugged in for 1 or 2 hours starts fine,just cant stay out late
|
| WTB Taillights for 1978 Delta 88 | 08 Feb 2004 15:54 GMT | 1 |
looking for tail lights for a 1978 Delta 88. please email/reply asap. looking for good condition lights. thanks
|
| ac clutch removeal 1993 silhouette[van] listed as full truck tool front and rear ac units | 06 Feb 2004 02:14 GMT | 1 |
Auto info: AC clutch tool for front, at engine, compressor for 1993 silhouette van. Todo: Need to replace the clutch bearings. Have looked and tried all tools listed on
|
| Wanted : 1985 Cutlass Rear Bumper !!! | 05 Feb 2004 20:03 GMT | 1 |
I am trying to locate the rear lower crome bumper for a 1985 CUTLASS SUPREME 2 door ( if that matters) The bumper must be dent and rust free..... Thanks !!!
|