| Thread | Last Post | Replies |
|
| Computer Reset | 01 Apr 2005 00:42 GMT | 2 |
I recently had my fuel pump replaced and to do so, the battery was disconnected. This messed up my computer and now the car won't even idle on it's own. It also kicks and surges and the RPMs are everywhere on the dash. I've tried everything to reset the computer. Does anyone have ...
|
| A sad 98 day | 30 Mar 2005 05:15 GMT | 3 |
Tow company came to get my 1976 Nintey-Eight coupe yesterday. Had been sitting for a few years. Lots of Minnesota winter miles had not been kind. But damn. What a great car. 455. Power everything. Incredibly
|
| I need information on this car! | 30 Mar 2005 03:48 GMT | 1 |
My grandmother has a 91 cutlass ceria. I have no clue about the engine. I am looking to figure it out if the car has a distributor rotor. It has a hard time starting in the damp weather. I know I need to change the spark plugs but I need to know what else would be adviseable to ...
|
| Here I am Agan ! Help ! 1990 Olds Cutlass Supreme ! Broken ! | 28 Mar 2005 19:27 GMT | 2 |
I have posted here before here is where it all started for background: I need help! 1990 Olds Cutlass Supreme 1st It started missing like bad gas. Put in Gas Treatment. Ran better for a while.
|
| oldsmobile pcm meltdown or what????? | 28 Mar 2005 16:36 GMT | 2 |
Gentlemen; I have a 1991 olds 98. Just last week, the transmission started out in 3rd gear and stayed there, you could pull it down into first gear and it worked just fine, but it was very intermitant. Then the "service
|
| IAC Valve Location | 28 Mar 2005 04:45 GMT | 1 |
Where is the IAC Valve located on a 1989 Cutlass Supreme with a 2.8 Mulitport in it? Thanks.
|
| 1998 Olds Intrigue won't start. It does turn over. | 28 Mar 2005 03:33 GMT | 1 |
This car started quitting when she turned left sometimes. She would come to a stop, then it would start fine. Then one day, it just quit and now it won't start. You can draw an arc off the plug wire, and if you remove the injector
|
| 98 Alternator Light | 27 Mar 2005 03:26 GMT | 1 |
The alternator light is on. This following the replacement of the battery a few weeks before. It's a 1991 98 Elite. Does this necessarily mean a new alternator is in my future? How can I check without taking it to a shop?
|
| HELP ME PLEASE! I NEED HELP FROM YOU ALL! | 26 Mar 2005 23:22 GMT | 5 |
So I posted 2 topics before this, apparently no one has helped me at all. I?ve helped some people out, but I really want this help in return. So my friend and I went down to get a new battery, hooked it up and all my lights are working and everything. Tryed to start it, it
|
| 1980 Olds 98 Regency Lights were chrused looking for a shop!? | 26 Mar 2005 20:06 GMT | 1 |
Hy NG, i have a 1980 Olds. A nice 98 Regency Two-Door baby. Some damn kids chrushed my Sidelights behind the windows on the right side. (The roof lights like a Caddy have).
|
| Please Help! | 26 Mar 2005 16:23 GMT | 1 |
So I bought this car for $300 bucks knowing problems with the car, power steering pump is out for instance. Well the car drove fine until today when I was driving to work from school. All of a sudden my car seemed to be acting weird. The car started shaking and I looked under
|
| 1994 Cutlass Ciera Runs Hot | 23 Mar 2005 05:04 GMT | 1 |
Here is the scenario. I bought the car and noticed on the freeway it started to overheat (almost got to the red), I turned the heat on, it didn't help. I then turned the A/C on, this caused the secondary fan to kick on and cool down the engine. I replaced the Coolant Temp Sensor
|
| 2002 Bravada Remote Unlock/Lock not working | 22 Mar 2005 03:17 GMT | 2 |
My 2002 Bravada remote unlock/lock is not working. The power locks inside the car are unlocking/locking are working. I changed the batteries in the transmitter and no luck. It was working on and off for a couple of weeks. I am also having problems with the rear
|
| harmonic balancer pulley tool will not work? | 21 Mar 2005 22:20 GMT | 1 |
I need to replace my pulley but unfortunately no matter what we do the tool that was devised for the job will not work! I need to know if there is another way to take the pulley off.
|
| 1998 Olds Cutlass Owners Manual | 20 Mar 2005 04:21 GMT | 1 |
Hi everyone. I am new to this message board. I am currently an Electromechanical Engineering student at Wentworth Institute of Technology and I am doing a Carbon Monoxide sensor system in automobiles. I just got back from the junkyard with a 1998 Cutlass door to incorporate into the
|