| Thread | Last Post | Replies |
|
| 90 Trofeo Starting Poblems | 30 May 2007 02:11 GMT | 1 |
I have a 1990 Oldsmobile Trofeo , with the VIS srceen . The problem is , when I try to start no power . The VIS screen says remove key and wait three minutes . I replaced the pass key module , but still no start . I've tried two different keys , with mo luck . Dose anyone have this ...
|
| 1991 oldsmobile bravada | 25 May 2007 02:10 GMT | 1 |
i need to know the wiring diagram. i replaced the fuel pump and when i turn the key on to check it , pump will not come on. i have run a straight wire to it , so i know the pump is good, but i dont know how the wiring is . i think it could be in that.....????????/ dont know and its ...
|
| i need help please!!!! | 22 May 2007 01:43 GMT | 1 |
i need i wiring diagram for a 72 olds cutlass supreme with a 4 barrel carb... i am doing a restoration it's my first and i would like to run all new wires the old ones are shot.... Thanks for any help!!!!
|
| Am I asking for trouble driving my car before fixing.... | 19 May 2007 19:07 GMT | 1 |
I had posted an earlier article about replacing the head gasket and img on an Oldsmobile. Well they had done the ph test on the machine and determined it to be a blown head gasket. The problem obviously either just started or has been there for awhile and the same shop
|
| 86 olds 88 Wont Start | 12 May 2007 19:22 GMT | 4 |
I have an 86 olds 88 3.8 that wont start.I got it back from the shop one night(transmission work nothing major) and it was acting sluggish and the check engine light came on.I figured out whyit came on because the guy had left the IAT?sensor unhooked for some reason(thats what i
|
| 1999 Olds Cutlass Gasket Replacement | 01 May 2007 22:24 GMT | 3 |
I have a question. My girlfriend has a 1999 cutlass that she was using the dex coolant in and now needs a new head gasket she's told. Basically the cost to have it done is roughly just over $1k but we don't want to spend that on the car. It runs good otherwise just
|