| Thread | Last Post | Replies |
|
| 306 radio | 25 Dec 2003 01:41 GMT | 2 |
Can anyone tell me what tools I need to take the radio out of a n reg 306xrdt ?? I have to change the radio in my mother in laws car after Christmas, but wasn't sure how if was fitted and if I need any special tools, or if was
|
| 206 Recall over brake pedal | 24 Dec 2003 20:42 GMT | 1 |
I have read somewhere that all 206's before a cerin date are to be recalled over the brake pedal (clevis pin?). Does this include vehicles which are now out of warranty? I bought mine through a Peugeot dealer, although not new, so they must have it on their records, but I have ...
|
| drivin over 60mph | 24 Dec 2003 19:17 GMT | 9 |
my steerin wheel on my peugeot 106 starts to shake for bout 1 min then stops and then shakes again it conntinues like this as long as im doin over 60
|
| 306 Wet Footwell | 24 Dec 2003 10:57 GMT | 5 |
Hi I was wondering if anyone could help me with a little problem that I have with me pug. I've recently bought a R'reg (98) 306 XSI 3dr hatch and my drivers footwell keeps getting totally soaked. I at first thought it was those sale signs they so love to trap in the doors and these ...
|
| Rear wiper on 306 Estate | 24 Dec 2003 10:53 GMT | 2 |
I have replaced the blade on the rear end with a 11" Bosch but it still does not wipe the top end of the windscreen. Any ideas please? Many Thanks Compliments of the Season
|
| Helper springs - 405 | 24 Dec 2003 10:30 GMT | 5 |
Anyone have any lying around perchance? -- Regards. Mark.(AKA, Mr.Nice.)
|
| 106 Brakes!!!!!! | 23 Dec 2003 23:47 GMT | 2 |
Does anyone know about the following two problems i have? First, my front brakes wear in about 6 - 12 months, and i mean wear! It especially happens on the drivers side, and it wears rite down to the plate!
|
| What is the best way to put an XU9JA (D6B) on an egine stand? | 23 Dec 2003 22:23 GMT | 5 |
I'm getting my engine out of my 1.9GTI 205. I'm about to hang it on the winch, but I still wonder what the best way is, to put it on the engine stand. is the best way on the side of the gearbox?
|
| Airbags gone off..... | 23 Dec 2003 21:34 GMT | 2 |
My father in law mounted a kerb in his 307 XSi, at less than 10mph. All the airbags his side have gone off. Peugeot said "Oh they can be a bit sensitive" and suggested he made an insurance claim. They have been great, booking the car in for him, and giving him a courtesty car.
|
| 306 stereo question | 23 Dec 2003 19:25 GMT | 5 |
I want to replace the my stereo in my 306 with a CD player however I still want to keep the control stick on the steering wheel. Is it possible to wire this to my new stereo or perhaps use an adapter or will it just work once the new stereo is installed?
|
| 406 petrol stutters | 23 Dec 2003 18:32 GMT | 3 |
I have a 98 406 glx petrol auto. Recently, when I have started driving the from cold, the car will stutter. The rev needle jumps up and down between 2 and 3k revs even though I keep constant pressure on the accelerator pedal. I though it may be a gearbox problem so I put it
|
| 406 auto gearbox warning | 22 Dec 2003 18:41 GMT | 1 |
As some of you will be aware the 406 auto has a sports mode and a snow mode with relavant indicators in the centre of the dash. This morning these two indicators began to flash simultaneously and the whole car jolts when reverse is selected.
|
| THIS IS LEGAL!!!$$$$$ | 21 Dec 2003 23:37 GMT | 4 |
A little while back I was browsing through newsgroups just like you are now, and came across an article similar to this one that said you could make thousands of dollars within weeks with only an initial investment of $6.00. So I thought, yeah, right, this must be a scam.
|
| cooling fans | 21 Dec 2003 14:32 GMT | 4 |
can anybody tell me why my cooling fans keep coming on frequently even in this freezing weather. this is only a resent problem. and the temperature guage is displaying normal temp
|
| rear window heater/demister | 21 Dec 2003 08:59 GMT | 2 |
My rear window demister is kaputt. Tried the silver paint conductor fliuid repair-no joy---does anyone know whether you can buy heater elements for such a repair, Thanks Matt
|