| Thread | Last Post | Replies |
|
| 206 HDi with green "i" - whats this? | 05 Dec 2003 15:23 GMT | 14 |
What does it mean, that HDi signature has got the green "i" at the back?
|
| faulty 306 brakes? | 05 Dec 2003 14:25 GMT | 1 |
306 DTurbo 1998 with ABS: before the MOT the brakes were quite good. not much peddle travel, front end dipped, hard braking on water/ice caused the peddle to vibrated (ABS) etc At the MOT the dealer said the compensator was faulty. They 'freed' it off
|
| 106 Diesel Injection Pump Solenoid | 05 Dec 2003 14:12 GMT | 2 |
Hi,I am currently trying to replace the TUD3 diesel engine in a 1993 Peugeot 106 with a post-`98 TUD5 engine (to hopefully avoid the engine liner problems which ruined the TUD3!)The TUD3 has a Lucas injection pump, and the replacement a Bosch pump. Very little information is
|
| 1995(N) 306 Dturbo Idle Speed | 04 Dec 2003 17:17 GMT | 1 |
A while back I posted a message asking if my idle speed was too high on my car, the general consensus was yes it was too high (slightly over 1K rpm according to the rev counter) The main point from this discussion was to check the thermostat to see if it
|
| Anyone had their HDi 'chipped'? | 04 Dec 2003 16:42 GMT | 4 |
I've just got a 307 110bhp HDi, but it doesn't feel as fast and as willing to accelerate as my old 306 90bhp HDi, especially in the mid-range. I've read about 'chipping' where the ECU is altered to give a better performance. If anyone has had this done, I would
|
| Anyone installed their own alarms on the 206gti? | 04 Dec 2003 14:27 GMT | 3 |
Need help locating the below wires still as the Haynes is useless. Door trigger Door lock & unlock. Hazard lights
|
| I Need 806 Parts | 04 Dec 2003 12:16 GMT | 2 |
Can anyone help, I am looking for a speedo unit assembly for 2000 X Reg 806 hdi ,and a few other bit, anyone point me in the right direction?
|
| OT BEER | 04 Dec 2003 12:15 GMT | 4 |
A Sound Theory on the Virtue of Beer A herd of buffalo can move only as fast as the slowest buffalo. When the herd is hunted, it is the slowest and weakest ones at the back
|
| 306 Heated Screen Wiring Problem | 03 Dec 2003 15:38 GMT | 3 |
I have a Peugoet 306 Sedan (Saloon Version), and the heated screen was working from time to time, now it's stopped working completely. I have changed the relay and the switch without success, the wire from the relay and to the rear screen changes colour (Red Wire/Yellow Wire)
|
| Peugeot Service | 02 Dec 2003 21:22 GMT | 9 |
I just had the 30,000 mile service done on my 206 LXD and was charged ?150 for the pleasure. I was amazed when I was told they wanted another ?55 to adjust the handbrake! (They stated that they also clean everything for that.)
|
| 306 Electricals | 02 Dec 2003 18:58 GMT | 3 |
I've just bought a '93 306 XR. I know about the more common electrical problems but this ones a bit strange. When I put it in reverse not only does the reversing light not come on, but the dashboard stop light and overheat light on the temperature gauge come on very dimly (not ...
|
| [307] Mileometer discrepancy | 02 Dec 2003 06:35 GMT | 13 |
I read here a couple of weeks ago that people were seeing discrepancies between their mileometer and trip counters. Having just taken delivery of a new 307 SE HDI 110, I've also noticed such a problem. Typically, an extra two miles is added to the mileometer per journey (despite ...
|
| Update: 305 brakes | 02 Dec 2003 00:54 GMT | 6 |
Just a quick update to anyone who read my 'this isn't fun anymore' post. The problem with the brakes turned out to be the master cylinder - I checked the rear shoes and they were fine. Changing the master cylinder wasn't a problem - bleeding the brakes was! The
|
| 405 Heater... | 01 Dec 2003 22:46 GMT | 2 |
Ok, the heater in my 405 never truely seems to get hot anymore? (Mk2 1993 1.6i cat). If i leave it running and standing, or am in traffic or whatever and get the fan to come on, then it blows pretty warm, but not hot like it used to, and
|
| Peugeot 407 | 01 Dec 2003 20:23 GMT | 2 |
Any idea on a uk release date? Or what it looks like?
|