What is the difference betwen the TU3M and the TU3J engines?
Can I turn a TU3M into a TU3J?
Thanks in advance.
E.S.

I'm (soon) to be in the market for a 306 XSi. I'm looking for a 2000/01
around the ?6000 mark.
Do all XSi's come with leather seats as standard?
My problem is that I'd rather have non-leather seats (for personal reasons).

I have recently been told that the rear window in 307sw's could shatter for
no reason, and without warning, due to pins not being fitted to absorb
vibrations. Has anyone else heard about this, if so is there any more info
on it?

The dipped headlights (both sides) on my 306 XLD stopped working yesterday.
Main beam and side lights are working fine.  This also happened a couple of
weeks ago but corrected itself after a few minutes.  Is there a connector or
relay somewhere which might be worth me checking ?

Gents
My 406 1.9 TDI  50K miles failed its MOT for smoke emissions any suggestions
as to what may be the problem and a cure please

Peugeot reckon that they dont make one, and don't know of any elements that
will fit the existing socket.  Personally I find this hard to believe as if
the socket can accept a power adaptor then surely it must take a lighter
element.

I posted a while back on this but didn't get it working
tried resetting the alarm by pointing it at the receiver till the light went
out etc....
that didn't work

Hi Group
Standing against my first car buy I have considered a second-hand car,
namely a 406 V6... As cars are so damn expensive i Denmark i have to buy a
model from app. 96-98.

My Thanks

I have a 1995 M reg 306 XLd 5 door, I bought it 3 months ago 2nd hand.
I disconnected the battery today and this set off the alarm and now
the car wont start. I see there is a key hole under the bonnet but i
didnt get a key for that when I bought the car. The guy I bought it

I bought my wife a Sony CDX-L280 radio/CD to replace the stock radio in her
2000 206 (1.1L).
The Sony takes in two wiring blocks whereas the pug radio takes 3. Is the
third pug block for the steering column?

Hi all; I know this topic has been discussed before. I bought my missus a
new Pioneer Radio/CD player for Christmas, but have been unable to get the
old unit out! I have tried several long strips of metal (hacksaw blades
etc.) without success, so I might have to take it to an auto ...

Have lost wheel trim from my 106. I have been told that I will have to
purchase a set of 4. Can anybody confirm this or not.

I remember the good old days when a Haynes manual covered everything - now
we are being short changed. ?14:99 for what? half a story 'at that'.
Bill

Bonjour,
Je ne peux plus envoyer de pieces jointes avec outlook, pouvais m'expliquer
pourquoi?
Ps: un message me dis, que le temps est d?pass?.