| Thread | Last Post | Replies |
|
| starting problems 406 | 30 Jun 2004 22:13 GMT | 3 |
our Peugeot 406 Familia, 1.8 inj, aged six years old, shows some problems with starting the engine. Sometimes starting is as it is supposed to be, sometimes it is realy difficult: only after repeated efforts during ten minutes the engine starts. There seems to be no relation to
|
| Help! Replacing rear wheel bearing on 306 GTi6 | 30 Jun 2004 10:42 GMT | 1 |
Can anyone help... due to an unfortunate incident with a curb, I need to replace the nearside rear wheel bearing. Is this possible? I can't see how to get the old bearing out. There is a 11mm hex shaped hole on the rear or the trailing arm, but I can't get it to shift. Is it ...
|
| 405 reverse lights | 30 Jun 2004 02:51 GMT | 1 |
Ok guys, When i put my car into reverse (1993 Mk2 405 GLi 1.6) the reverse lights come on, all well and good, when i lift the clutch however the reverse lights go out, clutch down again, back come the reverse lights.
|
| F/S 17" alloys | 29 Jun 2004 07:24 GMT | 7 |
17" wolfracer alloys peugeot fit only, one yr old, ultra low profiles, cost ?187 each, will accept ?300 for 4, slight kerb damage on all rims....buyer must collect, in north east uk....cheers...
|
| D?faut 307 "?a couinnnnnnnne" | 28 Jun 2004 14:28 GMT | 3 |
La grande majorit?e des 307 ont un d?faut de fabrication, apr?s quelques milliers de kilom?tres un bruit de vielle charrette se fait entendre ? l'acc?leration et au freinage, cela et du ? la "rotule d'?chappement" cette pi?ce doit etre changer gratuitement par le r?seau Peugeot car ...
|
| water leak from all this rain we've been having | 28 Jun 2004 07:30 GMT | 3 |
Hi, my Pug 205 D has decided to let water in after all the rain we've been having. I can see what looks like the path when I open the back hatch and look at the sides just behind the back seat. The rear window seals look like they are slightly open at the top rear corner of the ...
|
| Replacement key | 27 Jun 2004 21:44 GMT | 3 |
Does anyone have any suggestions where I can source a spare key (not a push button one - just a plain key) for my wifes 206? My local dealer has quoted 45 quid - can I get one cheaper than this?
|
| 306 gti Air Con | 27 Jun 2004 18:07 GMT | 2 |
1998 306 GTI 6. I have been quoted ?600 inc vat for a new compressor and the two main pipes including fitting and regas. Is that expensive, is there a way to fix it for less? TIA
|
| 306 AC Regass Cost? | 27 Jun 2004 15:36 GMT | 11 |
My air con has eventually given up. Light comes on but no cooling. Been on the decline for a couple of years but as I rarely use it (306 or AC) I haven't been too fussed. When it comes on automatically I let it run for ten mins as a precaution then turn it off.
|
| Looking for 205 fog lamps | 27 Jun 2004 07:31 GMT | 2 |
Any sites out there that sell OE 205XS front fog lamps? Mine have rusted away to nothing, and I'd rather not get ripped off by a dealer if I don't have to... -Andy
|
| 306 grinding noise in reverse | 26 Jun 2004 22:45 GMT | 4 |
i have a 306 xsi (95), when I put the car into reverse and go back steering either left or right when parking there is a loud grinding-type noise coming from the underneath. I've had the car into 2 garages and they cannot find what might be wrong. The noise can be
|
| 306 central locking | 26 Jun 2004 22:04 GMT | 1 |
1997 1.6 petrol. The passenger side rear door no longer locks with the central locking. However once it's locked manually it will unlock with all the rest of the doors, although it make a loud repeated clicking sound for a few
|
| Running dry of diesel | 26 Jun 2004 18:23 GMT | 17 |
My little pug 205d ran out of diesel the other day. First warning was the revs climbing - opposite from running out of petrol. What is that? is it sucking oil from the engine or something? Anyway I filled up with a gallon in a container from the petrol station which was 300 yards ...
|
| [205] Wiring up front driving lamps - Help please! | 25 Jun 2004 21:10 GMT | 3 |
I've finally got around to getting some replacement front fogs for my 205 (some Cibie ones) and have decided I want to wire them up to a switch on the dash rather than have them come on when full-beam is on. I've got a spare dash switch (in fact I've got about 6 so I can blow some
|
| 306 XLd - engine nightmare | 25 Jun 2004 20:55 GMT | 2 |
Shortly after buying the car 2 years a go, I had to have the head gasket done. It went again a few weeks ago and so I've had to spend ?440 having it replaced (+ head skim etc). Unfortunately, it's not resolved the problem and the mechanic tells me I need a new engine :-(
|