So there i was 1st thing this morning, out on my car...
I cut a hole in the lower spoiler and mounted my Oil cooler.... i routed the
braided hoses underneath and around to the oil filter.
I jacked the car up, took the sump plug out.. let the oil drain out. undid

P reg 2.1 turbodiesel estate. Speedo has stopped working. Somtimes worked
intermittently but has now ceased completely. I've cleaned and checked the
connector on the speed transducer located near the output driveshaft but
still no joy. Is there another connector between this one and ...

I have need of a set of points and condenser for my 78 SW. It is a 505
and a great vehicle. It has the original brakes, except for new master
cylinder. Drives great and is well tuned in all ways except for the
points. It has less than 95,000 miles and I put them all on since I

does anybody know how much R134a refrigerant is needed to
re-charge the aircon unit on a '98 306 LXD, or where I can
find out, the manuals etc. seem to be rather shy of the
aircon units!!

My daughter has a 206 on an X plate, she reports that the engine frequently
races and cuts out, when she attempts to restart it turns over quite a few
times before it picks up. She has had it in her local repair shop which is
Nationwide Autocentre of Chelmsford, they say they can ...

Can someone tell me the easiest (and correct :-p )way to remove a 306 gear changer knob. Thx

I need to replace the radio antenna on the roof of my 306 XN, 'cause it has
broken off. A quick look taught me that I had to strip the interior ceiling.
Can anyone please tell me if this is right, or is there another, easier way
to replace it? For instance: is it possible to only ...

2 litre HDI,
With Semi automatic air con.
Pug dealer says no.
Air con specialist says yes and wants money to change it.

Thinking of getting one as OE replacement for my Gti...any good or
experience with this brand?
Jim

I have a 1998 406 1.9Tdi Estate.
The mileometer and trip meter are working ok but are not illuminated.
Does anyone know if this is easy to remedy or will the dash have to be
removed to rectify ?

J'ai une 309 qui a une entr?e d'eau .Comment r?gler ce probl?me?

Is it possible to fit carbs to the 1900 GTi?
If so ,where would be the best place to source the manifold & carbs.
TIA

Well, took it in on Friday for the Speedo to be looked at.
Got a call at 1645 saying that an engineer had spent 3 hours running tests
etc and cannot find anything wrong and could I go and pick it up.
I refused, point blank, to pick it up, and proceeded to tell my Peugeot

A quick question, I have a Dec 03 307sw 2.0s, and since I have had the
windows tinted my other half finds it dificult to reverse park.  Is it
possible to retro fit a peugeot reverse parking sensor? if so, any idea how
much???

ive got 2 problems with my 306 td
1. The car is fine when only me is sitting in it. when i carry passengers
the back of the car rubs the wheels and it literaly will not move. the
shocks are fine but it wont take any weight. i brought it to a garage and