A french company sp?zialised in French Parts for you
http://www.cod-cars.com
Best regards
SARL COD-CARS

I've seen a lot of people here asking how to unlock their stereo's when
they've lost their code.  I lost mine after moving house and after
searching the internet for a few hours found this program which will
give you the unlock code based on the bar code on the top of your

I have a 306 XSi 2.0 8V 1997 P reg and it has problems stalling whilst it's
warming up. If I try to drive off it will stall. Once warmed up it's fine. I
have put a new stepper motor and new coolant temp sensor in. The MAP sensor
seems ok. The engine management light does come on for ...

Last week i changed the front wipers and now i've noticed that the
service guy gave me shorter wipers. Although they do cover the whole
windscreen, the wiper on the driver's side (left hand side) does not
pass over the automatic wiper sensor (Peg 306 Year 2000). For this

Hi all, Just bought my first ever Pug. It's a 205 1.8D. Anyone know of any
websites along the lines of this one which is for Volvos ?
http://www.brickboard.com/   Would really appreciate it.
Plus, what does one look out for in the above car? any warnings or gotchas?

How and when should they fold?
I can't find any indication as to hot they fold automagically or whether
it's a button or timed or what.
Ours just sit there like normal mirrors.

Ok, so my little 205 has got a upper and lower strut brace..... I`ve got
Spax springs fitted.....
I should hopefully be getting my 1.9 beam axle with disc....
The car handles very well now... not a lot of body roll.... so what

Ok it's a stupid question but I want to change the plugs on my 306xs
99'.Looked in Haynes manual but they only go up to1998 which have different
engines.Are they covered up by anything, any help would be appreciated.

Iemand ervaring met het het bouwen van een intercooler op een 205
turbodiesel? Ik weet wat ik nodig heb, maar wat ik nog niet weet is hoe je
de brandstofdruk en de turbodruk moet opdraaien. Ik heb een Lucas CHV
brandstofpomp en een KKK turbo.

I changed the timing-belt on my CTI yesterday, also changed the
tensioner. The engine was running fine afterwards, no unusual noise,
absolutely nothing unusual actually, but after some 4 or 5 km the belt
snapped.

As many of you may or may not know I`m slowly ( very ) turning my 205GTI
into a hill type climbing car ( lol ).. well today as i was wizzing over to
Halfords in Poole ( no idea why ), I was behind a large blue "Gas" van and
in front of that was a Volvo 440... I`m unsure of what was ...

Anyone else ever had problems with the steering clunking when on full lock?
Especially when reversing, it feels like a sudden clunk as if you've driven
over a brick.
Dealer has had it twice and renewed some bushes, but this has made no

Have had my 1966 405STI written off in a rush hour nose to tail. Cost of parts
in this part of the world made it uneconomic to repair even though the car was
still drivable.
Thank to all in this Ng over the last four years.I have been very grateful for