| Thread | Last Post | Replies |
|
| Temp gauge problem? 307 SW | 07 Dec 2004 22:34 GMT | 3 |
the following happens with a 2002 307 SW (1600 cc): the temp gauge used to run steady at 90 degrees (Celsius, approx 194 Fahrenheit) when the motor was warm. All of a sudden the temperature indication has dropped to 75 (Celsius) when warm. The temp instrument seems ok. The dealer ...
|
| Peugeot 205 - Tail light cluster removal | 07 Dec 2004 21:40 GMT | 3 |
At the risk of seeming totally hopeless, can anyone tell me how to remove the nearside (left) tail-light cluster (brake lights etc) on a 205 (if it matters, its an M-reg, 1995 Sceptre Turbo Diesel). This *should* be a really straightforward job, [but I don't find anything on
|
| 406 Immobiliser problem | 06 Dec 2004 21:55 GMT | 8 |
I'm hoping someone can help me out here because with it being Sunday no one at Peugeot will answer the phone. I have recently bought a 1996 406. The guy I bought it from forgot to give me the immobiliser code. This wasn't a problem as the key is coded somehow
|
| Airbag warning light | 06 Dec 2004 13:46 GMT | 5 |
My 1998 406 diesel airbag warning light is stopping on, any ideas what could cause this and a possible fix anyone?
|
| Airbag warning light | 06 Dec 2004 13:40 GMT | 3 |
I have a peugeot 306 hdi, the airbag warning light is flashing all the time. I've checked the connections under the seat but everything seams to be ok. Any ideas ?
|
| 406 2.1 TD rising revs | 06 Dec 2004 12:27 GMT | 5 |
Recently my 406 2.1 TD has started to show a problem. When I change gears the revs rise! This happens infrequently but still enough to be a problem. When it's at a stop and idling (out of gear) the revs rise when I tap the accelerator and stay at the point they got to.
|
| 1997 306 user manual | 05 Dec 2004 21:13 GMT | 1 |
Hi dose anyone know where i can get hold of a user manual for a phase 2 306?
|
| Little leak | 04 Dec 2004 21:43 GMT | 1 |
About eight or so weeks ago I reported a slight loss of water. Receiving several replies to the effect it was likely to be a very small leak in the rad which would only get worse. Well it did and I finally took it into the local engineer [NOT THE DEALER, heaven forbid] and yes ...
|
| 406Turbo Diesel (overheating? ) | 04 Dec 2004 19:47 GMT | 4 |
My 1.9 406 TD has recently had a replacement engine fitted. There were a number of complications with this which I won't bore you with. It appears to be overheating now The normal operating temperature on the gauge is about 80 C but when pulling up a 1 in 5 hill about 400 yards long ...
|
| 405 plug gap | 04 Dec 2004 13:57 GMT | 1 |
anyone know the spark plug gap for a 405 1.6 gr 1990 h reg? I have some nice new NGK's but don't know what the plug gap is (not got a Haynes yet either !) Thanks in advance
|
| Revs go up but no acceleration? | 03 Dec 2004 23:39 GMT | 3 |
I have a W reg (2000) 406 Diesel HDI estate. I've started noticing a problem when I'm using 3rd, 4th and 5th gears (but mainly 4th and 5th). If I put the accelerator flat to the floor, the revs shoot up by about 500-1000 but the car does not really accelerate much. Then you get a
|
| Little leak update | 03 Dec 2004 18:13 GMT | 6 |
I've got the car back with new rad Total cost ?150.00 litres V6
|
| Clarion PU9833A Security | 02 Dec 2004 20:09 GMT | 4 |
I disconnected the battery on my PUG 405 and was asked for "CODE IN" on the Radio. I accidently entered the wrong code and it now displays a random number when I turn it on.
|
| 407 2.0HDi Sport steering | 02 Dec 2004 14:24 GMT | 4 |
Hey all Just noticed something about the steering on my 407 2.0 HDi Sport that raised some concers. When turning the steering wheel (especially from end to end) there is a noticeable 'tremor' in the steering wheel accompanied a
|
| 605 | 01 Dec 2004 22:29 GMT | 7 |
anyone got some good ideas on what to look out for on a second hand 605? secondly what sorta MPG would an auto do ?
|