Any body have any idea why when driving sometimes the spedo just drops to
zero? are there any fixes for this.
thanks
Steve

When I had my timing belt changed about two months ago they found that my
water pump was leaking, this was replaced, yesterday my water warning
light flashed on and I had to add about 3/4 of a litre, is this normal
loss over two months or is it likely that I have a leak?

I am trying to take out the clarion stereo in my P reg. 306. It appears to
be connected at the bottom of the stereo and not on the sides but I can't
seem to see how I get to detach it to remove it. Any advice gratefully
taken.

Is the boot of the 205 any bigger in the 5 door than the 3 door? I
think they're around 1990.
Also, what's the milliage like on these cars.. in comparison to other
automatics of this size..

I?ve read a number of postings about the cold start problems on the
Peugeot 106XRD, from what I can gather there is a problem with the valve
clearances. Is this an easy job to do for a novice or will it be better to
get it done at a garage? If it?s the latter any idea how much it ...

Hi,
I have had a search through the group for messages about my problem,
but couldn't find anything which seemed to answer my question, so
thought I would ask!

I am having the same problem with my 306 misting up when the heater gets hot
.and it does get hot no problem there ...but the hot air will not be
directed to the screen for some reason
I took it in to the local Peug dealer .The mechanic took a quick look and

I can never seem to get more than half a tank of petrol into our Phase 2 306
drop top. Is this a common problem or does it indicate some fault that needs
to be sorted?
An odd one, but any comments very welcome.

Help!
Got a mate that cant put his car into gear. The gears, clutch, and engine
appear to be fine, gear linkage is fine, and clutch is disegaging
properly, and is brand new. Hes got a peogeot 205 1.9gti petrol. Gear

i'm about to purchase this car on sat it has only done 4500 miles,when i
test drove this car a few days ago i noticed under light acceleration i
could hear a slight mettallic ratting sound (quite faint) i've told the
sales guy and he said everything will be checked over before ...

have you all ever heard of this happening? I'm assumiming this is
directly affected by the coolant in use, so my other question is what
type of coolant is safe for these engines? (1.8 alloy block and head)

I tried ro remove the brake disc on my 406. The two screws are Torx55, but
when I tried to loosen them the screw heads were destroyed. The screws were
wxtremelt soft as if they ere made of lead. The reads are now without grips
for the torx bits!! What did I do wrong, and how do I ...

Hi, we've got a 2002 206cc and I've just bought a PDA and a sat nav
reciever. In my 406, the sat nav works fine, but in the 206, it's a dodgy
reception at best. I know this is down the athermic(or somthing like that)
windscreen, and if I put the reciver on the parcel shelf, it ...

are there any common faults/corrosion spots I should look for ?
thanks
LJ

Hi, I have recently purchased a Clarion PU2294A CD/Radio player, I have the
code and no manual, can anyone tell me how I enter the 4 digit code to get
the radio working, thankyou
Stewart