| Thread | Last Post | Replies |
|
| 406 ECU tuning | 25 Feb 2005 09:10 GMT | 15 |
I have a P406 2.1L Turbo diesel engine, in which I have recentry replaced an air filter with a K&N one. I am now thinking of remapping its ECU, but not quite sure how much of a performance increase I would get. I would be very interested in getting more power over the 3000rpm
|
| engine needed... | 24 Feb 2005 18:56 GMT | 2 |
P reg 306 Gti6 Hope they are not as rare as hen's teeth. Teddyboy.
|
| Peugeot 306 +ve supply to ignition switch | 23 Feb 2005 23:20 GMT | 1 |
I have just seen what seemed a very strange fault on a Peugeot 306, S1, 1.9 Diesel. The car stopped and would not start. I found there was no electric power in the car when the ignition was turned to position 1 (or 2 or 3
|
| Goodbye 307 HDI | 22 Feb 2005 13:21 GMT | 1 |
the new fuel system that was required and now just just found out that the crankshaft pulley needs changing has done it for me,px'ed it in for honda civic ctdi se which i'm collecting on sat,i've had 2 bad experiences with pug's and their cust service is beyond a joke!thx all for ...
|
| Phase 2 306 Plips | 21 Feb 2005 17:57 GMT | 3 |
I have just picked up a spare plip for my 306 off eBay since the car only had one. I've managed to reprogram it OK, but then the old plip doesn't work :( Am I correct in thinking that the car can only "remember" one plip code
|
| Changing stereo in 406 Coupe | 21 Feb 2005 16:33 GMT | 8 |
I've recently bought a '98 3.0 V6 SE Coupe and am looking at changing the horrible factory fitted Phillips cassette/radio system. I've been to a few local dealers who have all said you can't simply plug in a new stereo with and adaptor like you would with any other car.
|
| Any known problems with 807 | 21 Feb 2005 16:29 GMT | 6 |
Does anyone know of any good reason why I shouldn't let my wife buy a 2003 peugeot 807 with 15,000 miles on the clock. Are there any issues with this model, I'm new to peugeots and she's dead set on it, opinions and comments would be welcome
|
| Servicing 206D | 21 Feb 2005 15:06 GMT | 1 |
Had 206D since new (X) reg. Left Peugeot agent behind once the three years were up as regards servicing. I read something about getting software updates that were only available from Peugeot dealers?
|
| 406 Coupe Water problems!! | 21 Feb 2005 10:49 GMT | 8 |
Hi All, this is my first post, looked around the site for help on problem with my car but can't find anything relates to it. Basically just bought a 406 Coupe SE 2.0 X reg, and within one week steam puring out of bonnet, Water levels depleating almost straight away and
|
| Creditwrench | 20 Feb 2005 21:53 GMT | 1 |
And the truth shall set ye free http://www.creditwrench-thetruth.blogspot.com/ Uncle Normie
|
| 110 Bhp HDi have you tried BP Ultimate and or Millers Diesel Plus | 20 Feb 2005 19:47 GMT | 15 |
Has anyone got any experience of either BP Ultimate Diesel or Millers Diesel plus fuel additive in the HDi engine? I would like to know what differences you have found? Cheers
|
| 1998 406 - ventilation blower | 20 Feb 2005 19:41 GMT | 3 |
Fan went intermittent about a week ago, packed up completely this morning......absolutely freezing coming to work. When it went intermittent, you could hear a relay click as you moved the fan speed slider over sometimes. I had to replace the ignition switch 18 months ago when the ...
|
| 205 problem when warm | 20 Feb 2005 00:43 GMT | 1 |
My '92 XT now has an irritating problem of running roughly and often stalling when warming up. It is fine when cold and the choke is out, fine when fully warm and the choke is in, but more often than not shortly after I put the choke fully in (and it is idling OK) it will struggle ...
|
| XUD Cylinder Head | 19 Feb 2005 22:47 GMT | 2 |
Does anyone know if there are any differences between the turbo and non-turbo 1.9l XUD cylinder heads? I might be facing the prospect of replacing the head on my non-turbo 1993 306 but can only source new heads for the turbo engine.
|
| 406 dashboard lamp question | 19 Feb 2005 19:46 GMT | 4 |
The RHS bulb on my dashboard (the one that illuminates the fuel guage and the rhs of the speedo) has failed Any suggest how difficut it is to replace? I would like to change all the lamps when the dash is apart.
|