| Thread | Last Post | Replies |
|
| Various issues on Peugeot 406 2.0 LX | 17 Apr 2005 17:28 GMT | 17 |
I?ve just bought a second hand Peugeot 406 2.0i LX, 1996 P Reg. Got some problems with it, and I?m hoping you guys can point me in the right direction. I?m aware some of these questions have been answered in part on other posts, but I?m also aware of the acute differences
|
| cd changer question???????? | 17 Apr 2005 11:10 GMT | 2 |
Can anyone tell me if a multi changer cd installation into a 2002 406 will require initializing by peugeot or will it just plug and play?? The head unit is a single cd unit factory fitted. Thanks.
|
| 406 vs 407 | 17 Apr 2005 00:05 GMT | 4 |
|
| recognising CD changer | 16 Apr 2005 17:09 GMT | 1 |
sorry if this has already been done but I need some info. 1999 406 GLX. Clarion single CD head unit. I have bought Clarion CD changer from e-bay. Wiring already in place. The cd changer powered up and ejects CD magazine etc.
|
| Oil Fitter Cap...where is it??? | 16 Apr 2005 16:24 GMT | 5 |
Hi I've just bought a K reg 205. Very well kept car and goes great. Having just chaecked the oil and found it to be a bit low, I thought I would top it up. The question ie, does anyone know where the oil goes? Sounds a bit
|
| Peugeot 206 and CONSUMPTION | 15 Apr 2005 22:27 GMT | 2 |
I have a Peugeot Qiuksilver 206, 1.4 , 16V , petrol, Y 2004 (v-tec), and with my full tank (50 L), I can make only about 480 km?? is that normal?, do you have exdperiences with the same car?
|
| 205 front wings and mudflaps | 15 Apr 2005 18:10 GMT | 4 |
Last year I had the bright idea of replacing my mudflaps. Now I can?t get the old bolts out. I?ve tried using screw removers but the bolts won?t shift and I am unwilling to drill new holes. My next option is to remove the front wings and use the old "nut and locknut" (see
|
| Oil Leak | 15 Apr 2005 14:58 GMT | 2 |
I have got a 1998 2.1td with 85K. recently noticed oil dripping down the back of the engine it also seems to be coming out from the inlet manifold unions. Also the pipes into and out of the intercooler seem to be sludged up. Any Ideas.
|
| 306 warning light | 15 Apr 2005 14:44 GMT | 2 |
This must have been asked before but I?ve done a search and can?t find an answer. I?m getting a warning light on my 306 that isn?t in the manual - what is it?
|
| peugeot 306 lreg (1993) | 15 Apr 2005 14:30 GMT | 2 |
have recently bought a seconhand peugeot 306 xld and after driving it home i tried to start it up again and it doesnt even make a sound,all lights,wipers etc will work tho so dont think its a battery prob,have been told it could be a immobiliser problem I dont have a clue where to
|
| Peugeot 406 LX 2.0 litre LX Philips radio | 15 Apr 2005 09:28 GMT | 5 |
The above car is fitted with a philips Radio. The radio was found to be dead after purchasing the car.I have replaced the Fuse on the back of the radio.Now there is some life in the Radio the front opens and it now takes a tape and ejects it but there is no other life like
|
| 306 handbrake adjustment | 14 Apr 2005 20:07 GMT | 1 |
Please tell me where the handbrake cable adjuster is situated on a 1996 turbo diesel 306. Can't see anything at the lever end or along the cable line.
|
| need advice replacing 306 seats & door panels | 14 Apr 2005 19:04 GMT | 1 |
My dog has chewed up the top of all my door panels & seats in my 1997 1.4 306, so I need to replace my complete interior. I have been looking at sets of seats & door panels for sale - and have come across a good set from a 1998 model 306. However the door panels I found are slightly ...
|
| electrical problem | 14 Apr 2005 17:28 GMT | 8 |
All of a sudden my heater fan has stopped working on speeds 1, 2 and 3 though it works on 4. Is this a faulty switch and is replacement difficult? or is there wiring common to the three speeds but not the fourth? Thanks guys
|
| 1991 605 head gasket gone - DIY job or junk the car? | 14 Apr 2005 08:47 GMT | 5 |
I have a 1991 Peugeot 605 (rare in the UK) with a blown head-gasket (4 cyl petrol). Garage repair quote is more than car is worth. No Haynes manual available, so DIY would need to be by guesswork and exploded views from electronic parts catalogue. Advice? Any Manuals, websites?
|