| Thread | Last Post | Replies |
|
| 205 electrical prob | 07 Apr 2005 11:18 GMT | 2 |
my girlfriend has a 205 diesel and shes having periodic electrical probs including indicators stopping working windscreen wipers going slow flashing dash lights where all the lights on the dash flash on at once when driving and the most awkward prob is fuel guage not reading true ...
|
| 407 SW Recalls | 06 Apr 2005 22:19 GMT | 1 |
Got mine at the end of November and it had it's first service this Friday just gone, at which point I was told that there were 6 recalls due on it! They carried them out today (Wed), but didn't actually say what they were, has anyone
|
| Peugeot 406 Emissions Limits | 06 Apr 2005 20:50 GMT | 3 |
Can anyone tell me what the MOT emission limits are meant to be for my 1996 406 2.0L Petrol? I am suspicious that my MOT tester has used the wrong limits!
|
| Fitting A Clarion CD Changer to a 206 | 06 Apr 2005 20:42 GMT | 3 |
Hi can anybody help me?? I have the standard head unit for a 206 in the car at the moment and would like to fit the Clarion 6 disc changer unit to it, I have been told that all the cables are already in the vehicle and run down the passenger side and into the boot, can anybody tell ...
|
| brandstofmeter Peugeot 205 (DUTCH) | 06 Apr 2005 20:14 GMT | 4 |
Sorry, my English is very bad... Op onze tweede hands Peugeot 206 1.4 HDI (groene I) hebben we een klein probleem met onze brandstofmeter. Wanneer we de tank helemaal (tot de nok aan toe) aftanken, geeft de meter
|
| 405 recirculation motor clicking! | 06 Apr 2005 19:02 GMT | 9 |
So as not to be left out, my 1995 405 has started the dreaded clicking noise. In some strange perverted way it almost seems reassuring that my car is typical of the breed!
|
| Which Stereos need iso adapters for an R reg 306 ( mark 2 )? | 06 Apr 2005 18:09 GMT | 2 |
Sorry I am a newbie and have never changed a car stereo before, my clarion radio cassette has packed up and I am looking to replace it with a sub £100 cd tuner. I am thinking of the sony cdx2000, but am confused as to whether it will need an adaptor or not or will just plug straight ...
|
| steering | 06 Apr 2005 18:06 GMT | 4 |
can anybody help me! ive got a 93 306xl is there any greaseing points for the steering i dont have a manual! thanks
|
| PUG 205 Ignition problem | 06 Apr 2005 08:44 GMT | 4 |
I have yet another problem with my 205. The car keeps cutting out as the spark is shorting from the HT leads to anywhere possible under the bonnet. So far I have seen the spark (at night) jump from the leads to the throttle cable, from the top of the Coil lead to the water hose, and ...
|
| Hottest vinyl graphics for cars I've seen anywhere.... | 05 Apr 2005 21:23 GMT | 1 |
check out: http://www.tribeccastreetgraphics.com
|
| Body kit help needed | 05 Apr 2005 16:33 GMT | 3 |
http://minuit10.net/vcourse/Page3.html This says its a Pug 205.. does anyone know the kit.. or is it 306 parts made to fit...? Thanks for any info
|
| 405 diesal leak | 05 Apr 2005 01:20 GMT | 13 |
i got a 405 turbo diesal 1.9 with lucas fuel pump and got a serious diesal leak from the engine compartment near top of engine i think. it appears to be from cam belt side of engine rather than from fuel pump section on top i checked all pipes going to pump and nothing from there ...
|
| Clarion 6-Disc autochanger for a 406 | 04 Apr 2005 22:10 GMT | 5 |
Further to my earlier posts regarding the death of my cd auto-changer in my 1999 406, does anyone know where I can get a replacement auto-changer in the UK. It is a Clarion PU-2293A made specifically for Peugeot according to Clarion.
|
| 1.9TD 306 Oil Warnibg light | 04 Apr 2005 21:32 GMT | 2 |
Hi, A problem with 'P' 306. For some 500 miles now the oil warning light has been flickering. The local garage have changed the switch and say the pressure is OK. The flickering persists at all speeds and they are foxed. I noticed that that electricly the switch is connected ...
|
| Peugeot 206 Cambelt replacement | 04 Apr 2005 21:26 GMT | 2 |
I have a Peugeot 206, 1.4 petrol, manual, Y Reg (2001). Can anyone tell me when the cambelt will be due for replacement please? Thanks in advance
|