| Thread | Last Post | Replies |
|
| FS: 205 auto bonnet | 31 May 2005 21:20 GMT | 1 |
As subject really. It will have to be collected from down south (Southampton/Bournemouth area). Anyone interested? Make me a (sensible) offer. Also have a 405 intercooler/manifold which might go well with the bonnet for
|
| 307 making new noises | 31 May 2005 17:26 GMT | 3 |
Does anybody know what these noises might be related to? Having been parked, if you move off slowly it makes a loud metallic 'click' from underneath somewhere. It's slao started making a funny knocking sound, apparently from the front.
|
| 306:removing a radio cassette | 31 May 2005 09:07 GMT | 1 |
I am trying to remove a radio cassette from my 306 to fit a cd player.Does anyone know how to get it out of the dash. cheers Dean
|
| brake fluid level low | 31 May 2005 08:14 GMT | 3 |
i have pug 307 sw hdi... about month ago, i got warning sign "brake fluid level low", went to dealer, they have changed front brakes,they were worned, and changed brake fluid, because car is 2 years
|
| Aircon maintenance - how often? | 30 May 2005 12:59 GMT | 6 |
I've read that it's a good idea to look after your air conditioning system to prevent expensive problems later. Does anybody know how often the system should be serviced on a 307? Androo
|
| peugeot boxer van 2.4deisel | 30 May 2005 08:42 GMT | 2 |
hi there i recantly bought a 2.4 diesel boxer van to do out as a camper van but when i went away on the week end i had to come home early as there was smoke coming from the exahust when i de accelatated and a loud tiking noise when i reved the engine hard in every gear i have taken ...
|
| will wheels from a 19gti fit a 16gti | 29 May 2005 22:38 GMT | 2 |
hello could any body tell me if there is a problam with putting 19 gti wheels on a16gti car as mine seems to catch the rear wheel arch or is it some thing else
|
| 306 brake caliper seized... | 29 May 2005 21:37 GMT | 1 |
My passenger side front brake caliper has seized. (1997 1.4 Style) Is there any way I can free it up again, or do I need to replace it? If replacement is required what would be a ball park figure of getting it done at a garage?
|
| Where do i find a stepper valve? | 28 May 2005 20:42 GMT | 1 |
My 406 is behaving badly and someone said it could be the stepper motor/valve? Can anyone tell me where it is? Mal
|
| 307 sound system | 28 May 2005 13:42 GMT | 2 |
Living with a 307 is great, but for some strange reason the ice has to have one of the worst set-ups ever. if u have a tiny bit of bass on then the doors rattle. what is the best way to sort this.
|
| 306 XRDT Immobiliser Problems? | 28 May 2005 01:36 GMT | 12 |
I own a `94 xrdt, i have been away for 5days and i have come back to start my car and i get ignition (no crank on engine) then the headlights flash and the dash led flashes, i have never seen this led flash before so i presume its a problem with my immob.
|
| Peugeot 206 exhaust | 27 May 2005 22:36 GMT | 4 |
Where the middle bit of the exhaust meets the back box the exhaust pipe has split all the way round and come apart. i have it booked in to be fixed, but peugeot have told me it isn’t covered under warranty, is this right i have had it from new and its 30 months old? can i
|
| 306XLD oil FILLER removal | 27 May 2005 21:40 GMT | 3 |
Can someone tell me how to remove the oil filler assembly from the block on a Peugeot 306 XLD? Reason: The oil vapour hose is split. The lower hose end is fixed with what looks like a Jubilee clip but without the screw. Its a use once
|
| My Pug doesnt like leaving the motorways! | 27 May 2005 10:28 GMT | 1 |
After battling with idle issues for a while now, my 205 1.6 GTI is running well, and rarely cutting out. However, once it has had a stretch on the motorway, of even 5-10 minutes or so, at speeds of 70-90, and I pull off onto a slip road, or stop at a roundabout etc,
|
| Fules tank seal and the crap peugeot dealers | 27 May 2005 04:36 GMT | 8 |
I recently took my car for a MOT and it failed on the handbrake not working and fules tank seal leaking. As if this wasn’t bad enough I ordered the fuel tank seal and all I got was a rubber seal which cost 30.00 pounds!!:evil: . I thought other dealers were bad.
|