I'm losing water, mostly into the passenger footwell, but a small amount
into the drivers side too...... Already used radweld which bought me the
last 3 months or so (put it in when I first detected the coolant smell). Car
is 1998 estate. Is this likely to be the heater matrix, ...

Good day,
I recently took my 2004 model 307 in for it's 30000km service and was surprised to find that they only changed the oil and oil filter. My friend recently took her 206 in for it's 30000km service (to a different dealer) and they changed the oil, oil filter, air filter, ...

I’ve owned a 205D for a while now and want a GTi as well now that i’ve
got money. The last petrol I owned was an old x reg (1981) Toyota
Starlet 1.3 but I’ve driven a 2l Subaru Legacy and a 1.8l Xantia in
the mean time.

My 406 HDI has covered 200.000 KM.
The car has some starting problems, how do I check the valve clearances and
can it be adjustet?, and how?
TIH

Can you help?
My car normally runs at 70C, towing the caravan down the M5 I noticed that
the temperature reached 90C,at times, should the radiator fan have cut in?
Also my radiator has a small leak I think, although the water loss is

If I switch on the inside fan on and set the airflow direction to my feet,
air is still blowing in my face, although the direction setting is set
towards feet only, the air flow outlets that blow air into your face if not
sealed off.

My Peugot 106XN has an occasional gear selection problem - only happens
when in heavy traffic traffic queing situations and when it happens it is
impossible to select any gear. The only solution is to stop engine for a
few minutes then restart. Peugot main dealer has failed to find ...

Collins & Aikman Products Corp.
Former CEO of the company David A. Stockman has quit his postion and given a tidy 20 Million Dollar going away present for his gallant efforts to ruin the company.
Shortly after his "retirement" the company is forced to file bankruptcy and now is on ...

Does anyone know how to test the key plip on a 306, the red led is
coming on but i dont think it is sending a signal.

My 106 Zest 2 is revving all over the place, sometimes it is so low it
stalls sometimes it jumps to 3-4k, any ideas please???

Can someone tell me how easy/difficult it is to get to the background
lighting bulb on the outside temp display of a '92 405? One side shows
time - that bulb's fine, the other shows temp - that one's duff.
TIA

I wonder if someone is able to offer me a little advise? I think I know
what is wrong, and how to fix it, but I'd very much like to check.
My 306 has had a little toruble starting recently, to the point that of
late, it now always starts for 1 second, then dies. Im fairly sure that

I  have started to get a squeaking noise from my breaks quit often when I'm
driving and I have to push the break pedal on and off a few times to try and
stop the squeak. I don't think I need new pads or shoes as I have only done
9000 miles in three years and I had both front and ...

Why Peugeot made 405 Turbo 16 if they already had great 205 T16? And for
what, only for Paris-Dakar rally?

I  have a 205 TD and have purchased one of these beauties:
http://www.dawesdevices.com/powerpack.html
From my own research I have found that the standard maximum boost pressure is 0.7bar.
Bearing in mind I have No charge cooling at all what do people reckon would be a resonable ...