| Thread | Last Post | Replies |
|
| 306 TD 1.9 has a negative mark with numbers on the speed dial | 17 May 2005 13:55 GMT | 5 |
Need your attention. I have 306 TD 1.9 1999 model, when i turn on the ignition, there is a negative sign with numbers like -300 and a sign of spaner on the upper left corner. would you please tell me what it is about and how can i get rid of it.
|
| 307 electronics | 17 May 2005 07:02 GMT | 2 |
Good day, I've recently noticed some strange behaviour on my 2004, 1.6XT 307. When I unlock the doors from the remote it makes a double-unlock noise (like front then back), then when I switch on the ignition the wipers wipe once and the headlights flash once. Also, more often than ...
|
| any advices about peugeot 307sw 2L 16v ? | 16 May 2005 18:48 GMT | 2 |
I have the opportunity to buy a peugeot 307sw 2L 16v, does anyone have an experience with that car ? does it consume a lot of gas ? thanks !
|
| 306DT Brakes ain't too good | 16 May 2005 17:56 GMT | 10 |
I recently purchased my first ever car - 1994 306 D Turbo with 117miles on the clock :D Have gradually been getting it into as good a condition as I can. My current project is the brakes. Now, when I got it the discs were badly
|
| Porting & Polishing? | 16 May 2005 17:22 GMT | 41 |
What does this process involve? How is it done? Is it something I could do myself or would I need a garage to do it?
|
| 306 remote | 16 May 2005 15:43 GMT | 2 |
I have fitted a new battery in my remote but it will not work. Do I have to "recode" the remote and how do I do it? The other remote works OK. Alec
|
| 306 1.6 xs 1998 idle problem | 16 May 2005 09:35 GMT | 1 |
I have seem to have this problem with my idle speed, it is always either idleling a little low or a little high, making the car slighly shake as its idle speed is very eratic, does any 1 know what things could be causing this.
|
| automatic wiping on 206 | 16 May 2005 08:43 GMT | 11 |
The windscreen wiper setting on my 206 is set automatic on a permanent basis. When it rains the wipers do not automatically wipe the windscreen, I need to change the wiper setting from Automatic to 0 (off) and then back to
|
| Driver's seat remove ??? | 15 May 2005 21:38 GMT | 4 |
Does anybody know how to remove driver's seat. I am trying to change it since the old one is broken. I've tried today to take it off but don't know how to do it. When I try to push it toward the control panel , it goes only to the certain point and something blocks it.
|
| 205 fan | 15 May 2005 19:06 GMT | 2 |
I have a 1994 Diesel 205. I cannot turn the fan off. It should be controlled from the middle of the three rotating switches. The switch moves ok and will travel the whole distance from left to right, but won't find a position where the fan is anything but full or perhaps three ...
|
| 605 SLi - head gasket gone - first problem | 15 May 2005 18:36 GMT | 5 |
You may have seen my earlier posting "1991 605 head gasket gone - DIY or junk the car?" Well, I decided on DIY and I'm now beginning to collect bits of engine all over the garage floor...
|
| How many 205 T16s are left? | 15 May 2005 17:36 GMT | 4 |
The start of summer has re-awakened my desire to one day own a T16. This is many years ahead but I was wondering if anyone has any idea how many are left? An Aussie forum quoted 200 per evolution (plus the original rally
|
| 205 Timing Belt | 15 May 2005 15:52 GMT | 14 |
I was asked if I've changed the Timing-Belt on my K reg. 205 Pug which has 101000 on the clock, and although I have had the car over four years, the answer is no, As I bought the car second-hand I don't know if it has been changed at any time? My next door neighbours car (not a ...
|
| TU series rocker cover | 15 May 2005 15:49 GMT | 9 |
The rocker cover rubber seal doesn't seem to sit right, even though it is in A1 condition. Its as if the rocker cover hasn't seated properly as before you tighten the bolts it can be rocked backwards and forwards slightly. I've checked the baffle plate and the studs and they are ...
|
| 406 faulty wipers | 15 May 2005 15:36 GMT | 3 |
hi i have a 1999 v reg 406 exec hdi 110. (face lift model?). The wipers only work ok on the slow speed. The fast speed will work some time but will not work if the slow speed has been in use for a time. The wiper blades stop as soon as you switch to fast. You have
|