Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Peugeot Cars / May 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
306 remote08 May 2005 21:24 GMT2
One of the two remotes for my 306 has packed up.
New battery made no difference.
The type is one without red light.
Any ideas
draining air from 40508 May 2005 20:06 GMT3
How many air draining points there are in Peugeot 405 cooling system ?
I know there is one over the thermostat cap. Are there more ?
Thanks.
Temperature guage flickering08 May 2005 19:00 GMT1
The temperature guage on my Peugeot Partner van flickers from maximum
to just above minimum all the time that the engine is running, or when
the suidelights are on.
The local garage has quoted €300 to fix the problem.
306 peculiar 'chaifing' sound...08 May 2005 09:02 GMT4
I was driving to work this morning as usual, when on the way I noticed there
was a kind of a rubbing/chafing sound that caused a small amount of
vibration in the steering wheel. I got to work, had a look round the car,
under the bonnet - nothing unusual.
206 radio problem08 May 2005 08:52 GMT1
when my battery was disconnected the radio pin needed reseting and i dont
no the pin. were could i get the pin reversed or is there any way round
this. any suggestions thanks
Water loss 406 D07 May 2005 23:04 GMT6
I seem to be losing a very small amount of water from my cooling system but
cannot find source of leak, would it be alright to add "Radweld" would this
affect antifreeze?
Grateful for any advice.  Terb
handbrake 406 exec06 May 2005 22:47 GMT4
I have a 1996 406 exec petrol turbo and my rear brakes keep sticking I have
tried loosening the pads but it doesn't help.  Any help appreciated
Cheers
Steven
Peugeot 406 LX rear electric windows?06 May 2005 15:25 GMT3
Please could someone advise whether its feasible to add rear electric
windows to a Peugeot 406 Diesel LX. Has anybody tried it and does it
already have the wiring for it? I’ve heard that the lower spec models
have all the wirring but not the features.It has central locking so I
Should I buy a new 307 SW SE?06 May 2005 08:46 GMT1
Any comments?
TIA
307 replacement05 May 2005 22:08 GMT2
Anyone know when the 307 will be replaced in the UK?
TIA
Peugeot 405 GRDT  1.9 1993 data05 May 2005 15:33 GMT5
I am looking for any data about this car since I bought it recently and have
no manual about stuff like fuel quantity, fluids,.....
Any usefull links are welcome as well as experiences.
Anybody selling a maintenance manual in any form feel free to reply.
Can you fit Citroen seats in Peugeots?05 May 2005 10:58 GMT1
I want temporary yellow trim seats to fit my 205 until I’ve got more
money and want to use Saxo Westcoast seats cos they will be in better
condition than 205 seats. Will they fit?
Peugeot 306 1.4 Oil Leak05 May 2005 07:34 GMT2
I have a nasty oil leak coming from the top of my engine, same side as
cam belt.  Does anyone have any idea where this might be coming from
and how it can be fixed?  It’s made such a mess it’s impossible to see
where it’s actually leaking.  Just wondered if this was a common
Peugeot fast wearing rear brake pads04 May 2005 21:29 GMT2
I seem to go through rear brake pads on my Peugeot 306 HDI D-turbo much
quicker than the front.  I only had the rears replaced 20k ago and already
they are down to 1mm.  The fronts still have plenty of life left in them
and I have done over 30k on these. Guess maybe the rear pads ...
206 offset question04 May 2005 21:24 GMT2
Daughter has just changed cars from an 03 206 entice to an 03 206cc.
She has 17 inch alloys on the Entice, will they fit straight on to the
cc or is the offset different? I suspect they are the same but just
need confirmation.
Pages: 1 2 3 4 5 6 7 8 April, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.