| Thread | Last Post | Replies |
|
| 406 HDI 110 Power upgrade?????????? | 16 Jun 2005 11:29 GMT | 4 |
Do the "Power Boxes / chips" really work?? What is the best option?? any recommendations would be very helpfull. I want to upgrade for better towing power not to just go faster.were you satisfied with the results?? any side affects??( 2002 HDI 110 estate). are the boxes/chips
|
| Windscreen water leak-- 406 Hdi ( June 2001) Estate | 15 Jun 2005 10:05 GMT | 3 |
Have checked Google for above but nothing matches apparent problem. When parked nose-down in heavy rain, water gathers in light assembly above windscreen. Any braking causes rain to pour out of light and down w/screen and fascia. Is it from aerial or possibly w/screen, in area ...
|
| Anti pollution error | 15 Jun 2005 10:02 GMT | 2 |
I have been experiencing terrible trouble with my 307 HDI D Turbo. The anti pollution warning light has now come three times in a couple of months and the car has either completely stopped or gone into hop home mode. I have taken it to a Peugeot dealer who informed me that the car ...
|
| 106 - Gears make a noise | 14 Jun 2005 21:10 GMT | 1 |
my car is an S’reg 106 zest-3 I’ve noticed when i change gear i can actually hear the gears coming together..... its like a CLUNK! each time i change gear (biting point) Is my Gearbox on it’s way out or is it something else??
|
| 106 zest 3 timing belt | 14 Jun 2005 08:54 GMT | 8 |
i have a peugeot 106 zest 3 and am wondering what the crack is with getting the timing belt changed? at what mileage should i be considering a replacement? thanks
|
| 306 Hdi engine completely cutting out | 13 Jun 2005 19:58 GMT | 12 |
I should be grateful if anyone can shed light on the cause and possible cure to the above fault. My 306 is a late model which has experienced this fault, intermittently, about five times over 2 1/2 years. The problem has been referred to two
|
| 406 Window motor (mk1 - mk2) | 12 Jun 2005 22:28 GMT | 1 |
Has anyone fitted a 406 mk1 window winder motor in a mk2 406 ? I’m trying to work out how the wiring should go but I need some help. The mk1 motor has 7 wires and my mk2 wiring loom as only 4 !! At the moment I have connected up so that the window will go up and
|
| 406 mk2 air con | 11 Jun 2005 16:58 GMT | 2 |
I was thinking of buying the electronic digital climate control unit for my mk2 but wanted to know if it would fit in place of the manual rotary dials. I think the rotary dial to make air come out of the vents/windscreen etc is a cable control but wanted to ask people here.
|
| 205 1.6 GTi engine into 306 | 11 Jun 2005 07:37 GMT | 5 |
Will it go? I've got a 205 1.6 GTi engine waiting to go into a peugeot that's done just over 30k and I was wondering if it'd go into a 306? Maybe a 306 XSi? or infact.. what else would it go into?
|
| Will ignoring a worn driveshaft break something? | 10 Jun 2005 17:36 GMT | 7 |
I’ve got a worn passenger side driveshaft on my 205 and don’t have the money to fix it at the moment (spent my car budget for the next few months). Will it trash the diff/gearbox if I ignore it for a while? I can get it replaced if it really needs doing, but I need money for
|
| wheel hitting wheel arch | 10 Jun 2005 16:36 GMT | 4 |
The wheel is hitting the wheel arch on the rear off side i have had the car for a few months and it has steadly got worse it is a H reg 205 16 gti Thanks
|
| Will the MI16 fit into a 305 van? | 10 Jun 2005 16:36 GMT | 14 |
Is it possible to fit an MI16 lump under the bonnet of a MK2 305 Van? I’ve recently looked into buying one, but will want more power out of it if I do decide to buy it. If the MI16 is unsuitable, are there any other engines that are
|
| 406 TDI Speedo Reading (R Reg 2.1) | 10 Jun 2005 15:03 GMT | 1 |
I know the following is going to sound really dodgy but here goes: I have just had to change my instrument cluster as the speedo had packed up. Managed to find a second hand one over the net and have fitted it all working much better than the old unit and £600 cheaper
|
| 405 TDi alternator | 10 Jun 2005 10:28 GMT | 3 |
Can anyone recommend a good, cheap supplier of an alternator for a 405 TDi? Also, will the alternator be interchangeable between aircon and non aircon models? (70A & 80A I believe). Many thanks
|
| rev limiter question - 307 Hdi DTurbo | 10 Jun 2005 09:18 GMT | 9 |
Does anyone know at what RPM the rev limiter is set to on a DTurbo? On the odd occasions that I've floored the throttle in low gears,1st & 2nd (at a traffic light grand prix, LOL!) the limiter has appeared to cut in at a little over 4000 RPM. As the rev counter is not red lined ...
|