Nice photo of a 307 in flames in this week's AutoExpress magazine.
http://www.autoexpress.co.uk/news/58123/blazes_fuel_307_safety_concern.html
--
Androo

After a discussion on urcm recently, I decided to book my 306 TD in to
have the known leaky front air con pipe replaced. They checked the
system, no other leaks, and they fitted the new pipe and a replacement
drier as well.

 What should i buy, peugeut or citroene?
ristine.dann@bankarea.com

405 keypad immobiliser repair - It will not accept the correct code vi
the keypad,
I have had my N reg 405 for some time now, with no major problem’s
just the usual upkeep. The only qwerk that my car has, is the fact tha

I am buying a 52 plate 206 sw D Turbo and want to put an iPod in it. Can
anyone tell me if the iPod is compatible with the cd player, and what I
would need to do the job?
Cheers all,

Can anyone help me, I was gonna order a new rear beam for my Pug 205 GTI
1.6.... I was gonna order from SSP Engineering and wondererd if firstly
anyone had used them before, and secondly if it would be better for me to
order an upgrade, and what would be involved..

I have a Peugeot 106 Escapade (N Reg - 1996) and it has been making a
very strange noise over the past few months.
Sometimes when I accelerate, I get this weird noise coming from just
behind the dash - it sounds like water full of grit / sand being

hi all. newbie here and require some help. my 406 2.0ltr petrol has
developed a problem. there is two fans on the front of the air con
rad. the drivers side is the only one working. wether i use the air
con or not?. also the temp goes right up to 105 then the drivers side

The windscreen wiper on my 406 isnt working very well.
I've replaced the blade but looking at the problem, it seems the wiperarm
isnt pushing the blade onto the windscreen.  Is there a spring in the arm
that can be replaced or will I end up having to replace the whole motor and

I’ve got a 3 door 205 that has done 175k. Near the top of the door
frame there is a groove that runs back along the car which I presume
is a weld line.
Since I’ve had the car there have been cracks in the seam but they

I`ve managed to scrape together £2000 for an engine mod to my 205-1.6GTI....
what would be the best option... other than an MI-16
Thanks

Hi, I know a few people have posted about this before, but haven't read
any solutions to the problem yet:
The drivers seat has started sliding back on acceleration, and
sometimes when you 1st get in. It's as if it's not clicked into place

My 406D fuel gauge only works intermittently, I appreciate that the fault
could be almost anywhere, does anyone have any idea where I should start
to look?

Just replaced the factory fitted Blaupunkt stereo in a '99 206 with a
kenwood head unit. Easy enough - two iso connectors plugged straight in
and I guessed the 3rd block at the top on the Blaupunkt radio was for
the steering column remote stalk.

I am a signwriter and have been asked to do some signs on a 106, i measured
it but then bought some software with the measurments and outlines of
vehicles, they are both very different. If anyone has a 3dr 106 or 106 van i
would really really appreciate it if they could nip out and ...