| Thread | Last Post | Replies |
|
| 206 Flashing STOP light...grrrrr | 31 Aug 2005 21:50 GMT | 7 |
I have not had my 206 W reg diesel very long and it had been fine to drive doing long/short trips. Now every so often when I am driving along at 50/60mph I suddenly hear a clicking/ticking (relays??) noise behind the dash and the STOP light starts to flash for about 10 seconds
|
| Service light help needed | 31 Aug 2005 20:37 GMT | 1 |
Serviced the 306 D now all I want to do is reset the service indicator (little spanner in next to mileage) has anyone any idea's please don't let it be as simple as disconnecting battery for a few seconds. Cheers in advance
|
| 306TD K&N Induction | 31 Aug 2005 12:24 GMT | 1 |
Will i notice any difference with the K&N 57i kit on my 1998 306 TD-sport? also has anyone fitted one? how do you do it? i found this web-site, but it looks odd putting it there. http://www.kandn.com/instructions/57-0509.pdf
|
| 406 2ltr turbo | 31 Aug 2005 10:26 GMT | 4 |
I own a P reg 406 exec 2ltr turbo (petrol) andneed to find a manual that covers this engine. None of the haynes 406 manuals do and I was wondering if any citreons use this engine. All help welcome
|
| FAULT ON 307HDI | 31 Aug 2005 00:17 GMT | 13 |
PURCHASED 307 HDI ONLY 18 MTHS.OLD.WHILST DRIVING BETWEEN 55-70MPH SEEM TO GET A NOISE THAT GOES TO YOUR EARS LIKE BEING IN AN AIRCRAFT COMING INTO LAND.IT SEEMS TO ONLY HAPPEN IN 5TH GEAR THE SOUND IS LIKE A BOOMING SOUND :(
|
| Ingition key replacement | 30 Aug 2005 22:13 GMT | 1 |
Is it possible to get replacement "casings" for the Peugeot iginition keys. I have a 1996 306 XSI and the rubber buttons have all but disapeared. I was hoping I could take the innards out of the existing keys and swap them into a new casing.
|
| 406 diesel hunting on start up | 29 Aug 2005 11:11 GMT | 2 |
This last few weeks my 2.2 hdi has started hunting on tick over. It starts easily and the problem dissapears after a few blips on th accelerator. Anyone got any ideas? Regards Phil.
|
| Pug J9 LCV | 29 Aug 2005 09:22 GMT | 1 |
I'm trying to find the Peugeot part number for the brake light switch on a Peugeot J9 light commercial vehicle. It's a small hexagon-bodied item with M10x1.5 thread and two spade lug connectors for the wiring. It fits into the end of the master cylinder. Usual UK Pug parts sources ...
|
| 406 Running unevenly | 28 Aug 2005 19:47 GMT | 21 |
I have a Peugeot 406 coupe 2.0 litre. Recently I have been driving it on the motorway at around 60-70 MPH and the car will intermittently "kick" or "jolt" as if it loses power for a split second. It will then continue relatively smoothly and the problem may happen again every few
|
| Heated seat? | 28 Aug 2005 18:29 GMT | 5 |
I have a 5 year old 306xs which I have had for 6 months, on cleaning out all my junk from the car recently I noticed there are wires under the front seats which also go up the back of the seat. I have no switch gear for heated seats and didn't think 306 had them so was wondering if ...
|
| Removing stub axle | 28 Aug 2005 00:51 GMT | 3 |
Pug 106 year 1995 I need to remove the rear off side stub axle due to damaged threads. I would be most grateful if anyone can provide details of how to do this or point me in the right direction.
|
| Water in 406 below the dors | 27 Aug 2005 02:34 GMT | 1 |
My -96 406 2,0 SV apparently is filled with water in the area below both doors on the right hand side. When braking or accelerating it sounds like a small river running back and forth down there. I have checed under the carpets, the footwell is dry. It seems to me the water
|
| cd clarion | 25 Aug 2005 16:03 GMT | 2 |
big problem: I got a cd stuck in my player. The car is only 2 months old. Is there a trick to make it release the cd? when I push the eject button there's a clacking sound but nothing
|
| 306 Meridian Stereo | 25 Aug 2005 08:11 GMT | 4 |
I've just bought a '99 306 Meridian - haven't even got it home yet. Does anyone know if the standard stereo has an ISO connection, so I can fit my CD player? btw this replaces an H-reg 205 style!
|
| 307 HDI hankbrake problem | 24 Aug 2005 09:20 GMT | 21 |
I am wondering if this is a known issue or if anyone has seen or heard of the problem before. If you have please can you post a reply. I have recently returned a Peugeot 307 2.0 HDi to the dealer after the hand brake failed twice within a month. The first time the car rolled
|