Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Peugeot Cars / September 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
406 Wiring info25 Sep 2005 20:36 GMT3
Is there a power take off at 12volts I can use to switch a relay that
would only be live with a running engine?
Andy
406 Heater Blower Fan23 Sep 2005 12:09 GMT7
I am really getting frustrated with this now.
My heater blower fan of my 1998 406 ONLY works on full power.
I was told I needed a new blower fan, so I replaced it.
Still no joy.
Locking Wheel Nuts - 307 Torque Settings22 Sep 2005 19:48 GMT3
One of my locking wheel nuts has snapped (the centre part of the nut,
unfortunately, the other bit is still on the wheel), the car is less than
two years old, asked peugeot if its still covered - response : check with
dealer. Just a little worried that the dealer will try and ...
TU2J2 valve clearances22 Sep 2005 19:25 GMT3
TU2JU (8v 1300cc) valve clearances anyone please?
TIA,
Nikolas
306 Knocking Gearbox21 Sep 2005 21:52 GMT1
We've just acquired a 2000 model peugeot 306 meridian.
The car is in really good condition but there are two problems
The first is with the gearbox. When driving along the road in gear
everything is fine when applying pressure to the accelerator, if you take
Peugeot 307 HDI 110 Xsi/D Turbo Error Message21 Sep 2005 15:06 GMT6
I wondered if anyone could explain the following error message and let
me know if it is a big job to put it right.
Thanks
"Diesel Additive Minimum Level"
306 2.0xsi heater   Nreg21 Sep 2005 13:46 GMT1
the heatyer doesn't work. I've checked the fuses
fitting turbo on a 205 engine21 Sep 2005 10:16 GMT7
What do i need to consider if I wish to add a turbo to my engine ?
I currently have a 1360 cc Engine but Im gonna get another one.
And I have thoughts of putting a turbo on it.
Some advice would be appreciated fully.
307 - beeps when ignition key turned?20 Sep 2005 19:46 GMT7
I have a 54 plate 307 HDI 136.
Every now and then, when I turn the ignition key to position2 (glow plugs,
etc) the usual dashboard lights come on and then go out as normal, but I
also hear 3 loud-ish beeps (all same pitch).  Nothing unusual comes up on
Peugeot History anecdotes ?20 Sep 2005 18:08 GMT4
Eleven year old Jannick is looking for nice history anecdotes and
other stories on Peugeot.
He wants them to write a 'paper' on Peugeot for school.
Can anyone please help him out?
peugeot electric windows 30620 Sep 2005 00:35 GMT1
i have peug 306 k reg 82 think and the electric windows r a nite-mare.
they work only sometimes and recently the pasenger side  went down and
cannot get it back up again , took door panel off can see the wire for the
switch  but stuck from there dont no where the fuse box is or ...
Peugeot 407 SW Safety Belt warning19 Sep 2005 21:38 GMT4
I recently purchased a 407 sw. I ALWAYS drive with my safety belt on
However when driving into a parking garage or 100m from home I like t
disconnect it. Does anyone know how to disable the AUDIBLE warnin
signal
Can I fit a SAXO VTR Engine into Pug 205 ?17 Sep 2005 13:27 GMT3
Heard that it could be done. Is that a fact and if so are there any
issues to consider in the conversion ?
Ive been offered one engine and I want to place in my 205.
how do I get the winders off (306)16 Sep 2005 19:30 GMT5
My front windows are stuff to turn, so the other day I thought I'd have a
look - but I can't get the window winders off any ideas??
Peugeot 306 (L reg)(5 door)
Bill
406 remote key - again!15 Sep 2005 20:04 GMT11
I’ve spent the past few months trying in vain to get a remote locking
fob for my 406 (1996).
My dealer refuses to assist me in any way, so speaking to another
garage, plus advice on here I’ve done a bit of digging around in the
Pages: 1 2 3 4 5 August, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.