I suppose that differential in my car (Peugeot 605 3.0 12V, 1990 year)
is damaged, because I hear clatters from there. I would like to
dissasemble this differential, but I don't know how to do fast and
easily. So my qustions are:

I have a 2000 306 Meridian HDi (90) and early this morning, the drivers door
stopped responding to remote locking/opening.
Other doors open ok, drivers fails.
When locking, other doors attempt to lock, but drivers door fails and the

ive a pug 106 1.4cc xs. single point injection.
every now and then while driving, it wil judder, as if the engine has been
switched off, then it carrys on going. can anyone help????

Hi Group.
        Has anybody used these lazer blue lights in there car?if so are
they anygood.please reply if you have used these lights before.
thanks from chris addlestone surrey

I've had a rubbing noise that appears to be coming from the front
nearside (passenger side) wheel area when driving. It's more noticable
at higher speeds, say above 40mph.
I don't seem to be able to feel any vibrations in the steering wheel or

I have a question about keys with remote controls to Peugeot 405. do you
know perhaps whre I can buy casings to such keys? Basically, I wanted to
take the electronic part out of the old one and put it in a new casing. The
reason for that is that the button to the old remote is ...

I know this topic comes up alot and I have tried all the normal avenues to
rectify the cold stalling  issue and to date I have done the following: put
in new CAT, new temp sensor, new stepper motor, checked all hoses and pipes
for leaks, full service at independant garage (was ...

Probleem opgelost je gelooft het of niet maar er zat ongeveer 30 cl olie in
de bak dus vindt je het gek dat hij steeds uit de versnelling scoot, nu dus
niet meer
Bedankt voor de vele reacties, geen

Can any of you give me any advice re the replacement of the glow plugs on
the 406 2.1 td engine. They look reasonably accessible, the one behind the
injector pump looks the hardest to get to. I would appreciate any tips etc
you may have.

Hey I would like some feedback from you whether the 406 GLX 2.0 Model
is a good buy overall.

I don't normally read the manual, but in this case the owners manual was of
no use anyway. It doesn't say which fuse is used for the horn, but then on
looking none of them appear to have blown either, and I think everything
else is still working...

I'd need to know how many nuts/bolts/screws have I to unscrew to remove
the inner panels of the doors, and where they are. I have to put some
grease on the power windows mechanicals..
thank you very much!

hi alll, just fitted a clarion cd radio in my 206 s plate. works fine
but the stalk wont plug in. got the stalk with the radio and also the
two halfs of the plug at the base of the column. can anyone tell me
where to get the plug for the rear of the stereo for the stalk or even

I have a 1999 V 206 2.0L HDI,
I was driving to work this morning doing about 60mph...
I slowed down for a corner......
the speedo did not, I arrived at work and turned the ignition off.

Have a problem with the tensioner roller, in that I can`t seem to
twist it back anticlockwise to release tension on the belt.
Have undone both the nut and bolt on the pivot arm but the roller
won`t move back. The book says use a 10mm square drive to turn