| Thread | Last Post | Replies |
|
| Pollen Filter | 21 Dec 2005 21:28 GMT | 3 |
It's about time I renewed my pollen filter (206 4 yrs old) so I popped into halfords. They told me I needed a 'Cabin Filter' - and they had lots of boxes with cabin filters in them, is this the same thing? Thanks
|
| 406 rough idle | 21 Dec 2005 20:18 GMT | 2 |
'99 406 2Litre Petrol. Idle speed fluctuates +/- 50rpm or so, feels a slight misfiring/miss. Can feel it at speed too, if I keep the throttle absolutely still. Bloke at a garage says it could be a/the coil pack. Is this something I can
|
| Mp3 on a 407's RD4 | 21 Dec 2005 20:06 GMT | 2 |
Hi, I know that the RD4 radio CD player has a Mp3 capability that has to be switched on by the dealer and will involve having a socket fitted. If the radio has the Mp3 switched on will the CD player recognise a CD containing MP3 files? Is there a charge for switching
|
| front suspension 206 | 21 Dec 2005 19:19 GMT | 5 |
back again!! another problem with 206 1.9d just been out to shops and back again. on my route i have to go over a lot of speed bumps, only the noise that come from the front of my car sounded awful, like a really loud heavy creeking sound. sorry to keep bugging you but being female ...
|
| 206 diesel | 21 Dec 2005 15:26 GMT | 3 |
Can anyone help with a wiring diagram for a Peugeot 206 diesel (not hdi )year 2000 I have got serious gremlins !!!!!!!!!!! Please. thanks
|
| bleeping 206 | 20 Dec 2005 19:28 GMT | 1 |
anybody got any ideas what could be causing my 206 1.9 diesel to bleep? after starting the engine and pulling away i hear 3 same pitch bleeps. it does'nt happen all the time only now and again but its starting to do me bonce in!! any help would be appreciated :)
|
| K+N Air Filters | 20 Dec 2005 12:02 GMT | 5 |
does anyone have any experience with K+N air filters fitted to a hdi engine?. Thinking about either keeping the original airbox and just upgrading to a K+N filter or maybe fitting an induction kit , any suggestions?.Ive got a 2.0 hdi 90bhp
|
| Peugeot 307 Aerial - Can it be unscrewed? | 20 Dec 2005 08:34 GMT | 2 |
Hi, silly question I know but my aerial on the 307 doesn't want to unscrew. Can these be unscrewed or do I have to take my chance through a car wash? : -- Zuk -----------------------------------------------------------------------
|
| 206 CD changer | 19 Dec 2005 19:54 GMT | 2 |
I recently got a 2002 206 GTI, but the CD changer was missing. I've now obtained a new CD changer from the dealer and fitted it myself but the radio (head unit) refuses to recognise it. I'm now told that the radio needs to be configured to recognise the CD
|
| REv counter in 106 | 18 Dec 2005 21:43 GMT | 3 |
Got a 106 1.1i '94. Dash has no rev counter but a clock instead. Looking to swap it out for a rev counter. 3 questions i would like some help with? 1. Does anyone know if you can easily remove the clock? 2. What models of 106 (series 1) had a rev counter fitted? 1.4i?
|
| 206cc CD Changer | 18 Dec 2005 11:40 GMT | 4 |
I'd like to buy my gf a cd changer for her 206cc for xmas. The car uses the same computer display for radio/milage readout etc etc. Where does the CD changer actually go (I want to make sure that the wiring is there and that there is enough room (assuming that it goes in the boot
|
| Fitting 206 1.4 EFI engine into 1992 Pug 205. advice pls ! | 17 Dec 2005 12:46 GMT | 5 |
Im fitting a 206 engine into my 205. got the wiring, ecu and everything needed. The engine is already in the bay. Fits well using the 205 upper engine mounts. The two engines are basically the same. The previous was a
|
| 306 diesel ...how do you get the pipe ends of the heater matrix | 16 Dec 2005 22:07 GMT | 2 |
The M reg 306 my grandson has bought has had the heater matrix bypassed .... they just cut through the two pipes and put a bit of linking tube in as the bypass (which came apart due to it being tapered and the Jubilee clip not being tight enough .... result engine seizure and a
|
| 406 coupe stereo problem | 16 Dec 2005 09:19 GMT | 8 |
I have recently bought a 406 coupe, when i bought the car it needed the security code for the stereo, after getting the code i put the stereo on for the first time only to find out that only one of the 8 speakers is working which is a tweeter on the passenger side on the dash, i ...
|
| 406 Pulley breaking up in timing cover. | 15 Dec 2005 18:52 GMT | 12 |
I was down the local garage the other week and he had a horror story about one of the timing end pulleys breaking up on the 1900 diesel engine. Said it was common. Has anyone on here experienced such a problem??? It was a new one on me!
|